Test and Measurement Forum

Pico 4224 with IEPE Accelerometer

Post your LabVIEW discussions here

Pico 4224 with IEPE Accelerometer

Postby benscarrow » Thu Dec 15, 2011 10:59 am

Hi,

I need to set Channel A to use an Accelerometer, under Pico Scope 6 you set the Drop down from DC/AC to Accelerometer.

I have used the SDK pack and latest examples of the Rapid example but these havent get the option for this?

If anyone could help on this.

Regards Ben
benscarrow
Newbie
 
Posts: 0
Joined: Fri Dec 11, 2009 10:53 am

Re: Pico 4224 with IEPE Accelerometer

Postby benscarrow » Fri Dec 16, 2011 4:16 pm

The answer to this is to expand the options with the Range Setting.

Current LV examples have 0-13 which covers standard ranges. Add 20-33 to use the Accelerometer.

0 PS4000_10MV,
1 PS4000_20MV,
2 PS4000_50MV,
3 PS4000_100MV,
4 PS4000_200MV,
5 PS4000_500MV,
6 PS4000_1V,
7 PS4000_2V,
8 PS4000_5V,
9 PS4000_10V,
10 PS4000_20V,
11 PS4000_50V,
12 PS4000_100V,
13 PS4000_MAX_RANGES,

20 PS4000_ACCELEROMETER_10MV = PS4000_MAX_RESISTANCES,
21 PS4000_ACCELEROMETER_20MV,
22 PS4000_ACCELEROMETER_50MV,
23 PS4000_ACCELEROMETER_100MV,
24 PS4000_ACCELEROMETER_200MV,
25 PS4000_ACCELEROMETER_500MV,
26 PS4000_ACCELEROMETER_1V,
27 PS4000_ACCELEROMETER_2V,
28 PS4000_ACCELEROMETER_5V,
29 PS4000_ACCELEROMETER_10V,
30 PS4000_ACCELEROMETER_20V,
31 PS4000_ACCELEROMETER_50V,
32 PS4000_ACCELEROMETER_100V,
33 PS4000_MAX_ACCELEROMETER,
Attachments
PicoScope4000ExampleStreaming.vi
Updated with Additional Range Settings
(18.04 KiB) Downloaded 157 times
benscarrow
Newbie
 
Posts: 0
Joined: Fri Dec 11, 2009 10:53 am


Return to LabVIEW

Who is online

Users browsing this forum: No registered users and 0 guests