i2c decoder bug in 6.6.14.15

Forum for discussing PicoScope version 6 (non-automotive version)
Post Reply
ost
Newbie
Posts: 0
Joined: Tue Dec 06, 2011 2:33 pm

i2c decoder bug in 6.6.14.15

Post by ost » Wed Dec 07, 2011 11:20 am

There seems to be a bug in the serial (i2c) decoder tool. See the image:
picoscope6.6.13.15-i2cdec-bug.PNG
Grab of the bug
Note the start condition at ~430us. It is not grabbed, and reported as a byte write instead of a new read. (All thresholds are at 2.6v)

I would also ask if you could add options to add start and stop events on the list. Those are very useful when debugging i2c.

Thanks

Pico Stuart
Site Admin
Site Admin
Posts: 75
Joined: Tue Jun 30, 2009 3:08 pm

Re: i2c decoder bug in 6.6.14.15

Post by Pico Stuart » Fri Dec 09, 2011 12:36 pm

Hi there,

Thankyou for your post with regard to your i2c application. We have received the data files sent to support@picotech.com.

Once we have looked through the files I will respond accordingly.

In the mean time please do not hesitate to contact me.

Kindest regards,

Stuart
Technical Specialist

Post Reply