Test and Measurement Forum

6000 series scopes with automotive software?

Post any questions you may have about our current range of oscilloscopes

6000 series scopes with automotive software?

Postby Basil » Sun Dec 04, 2011 12:14 am

I have posted in the automotive forum, but thought I should post here, too. Is there any firmware available to enable me to use a 6000 series 4 channel scope with your automotive software as well as the normal scope software? I want a bench scope with higher frequency ability than the 4000 series, and the bells and whistles of function generator and spectrum analyser, but would also like the ability to use it with the automotive software, too. I don't fancy buying both.... ;) I realise it would probably lose the overload protection of the 4423, but that would be a risk I would take. Possible? Workarounds? No go?

Thanks.
Basil
Newbie
 
Posts: 0
Joined: Sun Dec 04, 2011 12:06 am

Re: 6000 series scopes with automotive software?

Postby Martyn » Mon Dec 05, 2011 4:09 pm

Sorry, there are no firmware upgrades for the 6000 series scopes, or upgrades for the automotive software, that will allow them to work together.
Martyn
Technical Specialist
Martyn
Site Admin
Site Admin
 
Posts: 2355
Joined: Fri Jun 10, 2011 8:15 am
Location: St. Neots

Re: 6000 series scopes with automotive software?

Postby Basil » Mon Dec 05, 2011 7:43 pm

OK, thanks for the quick reply Martyn.
Basil
Newbie
 
Posts: 0
Joined: Sun Dec 04, 2011 12:06 am


Return to USB PC Oscilloscopes

Who is online

Users browsing this forum: No registered users and 0 guests