RS232 serial connector for TH-03

Which product is right for your exact requirements
Post Reply
Vernon

RS232 serial connector for TH-03

Post by Vernon » Wed Aug 18, 2004 8:51 am

We want to incorperate your TH-03 logger into our Blood Audit and Release System (BARS) to monitor ambiant and fridge temperature. We have available the data lines on com port 1 only. Does this unit use any of the hardwired handshake or soft handshake?

Sarah

Post by Sarah » Wed Aug 18, 2004 12:33 pm

Hi Vernon,

Thank you for your post.

All the information you need as to the protocols used by the serial port is in the TH-03 help manual. You can find this at the following address:

http://www.picotech.com/document/document.html

Go to the Technical Reference section, then to Protocols. There you will find all the information you need.

If you have any questions after reading this, please do contact us again.

Hope this helps

Best Regards

Post Reply