Test and Measurement Forum

RS232 serial connector for TH-03

Which product is right for your exact requirements

RS232 serial connector for TH-03

Postby Vernon » Wed Aug 18, 2004 8:51 am

We want to incorperate your TH-03 logger into our Blood Audit and Release System (BARS) to monitor ambiant and fridge temperature. We have available the data lines on com port 1 only. Does this unit use any of the hardwired handshake or soft handshake?
Vernon
 

Postby Sarah » Wed Aug 18, 2004 12:33 pm

Hi Vernon,

Thank you for your post.

All the information you need as to the protocols used by the serial port is in the TH-03 help manual. You can find this at the following address:

http://www.picotech.com/document/document.html

Go to the Technical Reference section, then to Protocols. There you will find all the information you need.

If you have any questions after reading this, please do contact us again.

Hope this helps

Best Regards
Sarah
 


Return to Pre-Sales Advice

Who is online

Users browsing this forum: No registered users and 0 guests