Test and Measurement Forum

Recording stops at sampling interval over 100 ms

Post any questions you may have about our current range of USB data loggers

Recording stops at sampling interval over 100 ms

Postby pengberg » Thu Nov 24, 2011 2:12 pm

When using a sampling interval of more than 100 ms, the value recorded becomes a constant. As soon as the recording is stopped, the values again vary normally. It doesn't matter if the sampling interval is entered as 1000 ms or 1 second, neither will record the real values, only a constant value over and over again.
My setup:
ADC-11 (USB)
PLW recorder 5.22.1 running on a virtual XP on a windows 7 64-bit.
regards

Per Engberg
pengberg
Newbie
 
Posts: 0
Joined: Thu Nov 24, 2011 1:59 pm

Re: Recording stops at sampling interval over 100 ms

Postby Hitesh » Tue Nov 29, 2011 10:07 am

Hi Mr. Engberg,

I've been able to replicate the issue using PicoLog 5.22.1 on a Windows 7 32-bit system.

Please try installing PicoLog 5.16.2 which can be downloaded from http://www.picotech.com/software.html

I've tested it and it works at 1000ms intervals.

I hope this helps.
Hitesh

Technical Specialist
Pico Technology
Hitesh
Site Admin
Site Admin
 
Posts: 2058
Joined: Tue May 31, 2011 3:43 pm
Location: St. Neots, Cambridgeshire

Re: Recording stops at sampling interval over 100 ms

Postby pengberg » Thu Dec 01, 2011 2:15 pm

Thank you for your reply, I've just tested it and it seems to work OK.
pengberg
Newbie
 
Posts: 0
Joined: Thu Nov 24, 2011 1:59 pm


Return to USB PC Data Loggers

Who is online

Users browsing this forum: No registered users and 0 guests