ADC16 sampling rate

Which product is right for your exact requirements
Post Reply
Guest

ADC16 sampling rate

Post by Guest » Tue Aug 17, 2004 6:11 am

Hello,

I need to know if the 1.5Hz sampling rate for the ADC16 is for the acquisition of all channels or just for one?

Thanks

Sarah

Post by Sarah » Tue Aug 17, 2004 2:37 pm

Hi

Thank you for your post.

The 1.5Hz sampling rate of the ADC-16 is for one channel only. It is split between the active channels.

One way to gain a faster sampling rate is to drop the bit resolution from 16 bits, to 8. This will give you sampling rate of 100Hz, again split between the active channels.

Hope this helps.

Best Regards

Post Reply