Test and Measurement Forum

.DLL file running on WindowsXP

Post general discussions on using our drivers to write your own software here

.DLL file running on WindowsXP

Postby Mayez » Wed Aug 11, 2004 12:37 pm

This is a following up question from my post.

I'm wondering if I've to change something on ADC20032.DLL when I change the system from Windows98 to WindowsXP. This is because I've found that the program which is used to run well on Windows98 system doesn't work on WindowsXP. What happens is when the ADC216 is asked to take the data with adc_run function the led flashed but the data getting from its memory looks always the same eventhough the pulse's changed.

My assumption is possibly the memory in ADC216 doesn't really take the reading, which might be because there's some conflicts on the function in .DLL file running on XP eg. the compatibility.

Do you have any idea?

Thanks for every comments.
Mayez
 

Postby markspencer » Thu Aug 12, 2004 7:20 am

Hi,

The driver that is used by Windows XP and Windows 98 is the same one. However, the system drivers are different and need to be installed onto the computer. On your Windows XP operating system, have you installed Picoscope/Picolog. Once installed test the unit with one of these two applications. Then try your program again.

Best regards,
Regards,

Mark Spencer
User avatar
markspencer
Site Admin
Site Admin
 
Posts: 598
Joined: Wed May 07, 2003 9:45 am


Return to General Software Discussions

Who is online

Users browsing this forum: No registered users and 0 guests