PicoScope 7 Software
Available on Windows, Mac and Linux
Fast streaming signal capturing problem
Fast streaming signal capturing problem
Hi Guys
Need your suggest which I face the problem from the Fast streaming issue on the signal capturing which even though the BNC not connect the signal as well there will have the pulse which going to the -1V which can see the attachment ( as highlited as well ) . May I know how eliminate this problem ?
Detail
i) Software is use the ps2000_fast_stream.vi (labview VI) provided by the picospoce.
ii) the driver version is using 1.13.4.0
iii) The DLL & labview is comming from the CD which SDK PS2000_r10.1.0.17
iV) window home 7 is used.
Urgent help
Thanks
Regards
Anderson
Need your suggest which I face the problem from the Fast streaming issue on the signal capturing which even though the BNC not connect the signal as well there will have the pulse which going to the -1V which can see the attachment ( as highlited as well ) . May I know how eliminate this problem ?
Detail
i) Software is use the ps2000_fast_stream.vi (labview VI) provided by the picospoce.
ii) the driver version is using 1.13.4.0
iii) The DLL & labview is comming from the CD which SDK PS2000_r10.1.0.17
iV) window home 7 is used.
Urgent help
Thanks
Regards
Anderson
- Attachments
-
- Picture capture for the pico scope for nothing signal input for scope
Re: Fast streaming signal capturing problem
Are you running the Fast Streaming example as supplied or have you made any changes ?
If you disable Channel B does this change what you see ?
If you put a live signal into the scope do you still see the glitches ?
If you disable Channel B does this change what you see ?
If you put a live signal into the scope do you still see the glitches ?
Martyn
Technical Support Manager
Technical Support Manager