Fast streaming signal capturing problem

Post your LabVIEW discussions here
Post Reply
Posts: 0
Joined: Mon Oct 31, 2011 11:38 pm

Fast streaming signal capturing problem

Post by Anderson » Tue Nov 01, 2011 2:24 am

Hi Guys

Need your suggest which I face the problem from the Fast streaming issue on the signal capturing which even though the BNC not connect the signal as well there will have the pulse which going to the -1V which can see the attachment ( as highlited as well ) . May I know how eliminate this problem ?

i) Software is use the (labview VI) provided by the picospoce.

ii) the driver version is using

iii) The DLL & labview is comming from the CD which SDK PS2000_r10.1.0.17

iV) window home 7 is used.

Urgent help
Pico nothing connect.jpg
Picture capture for the pico scope for nothing signal input for scope

Site Admin
Site Admin
Posts: 3464
Joined: Fri Jun 10, 2011 8:15 am
Location: St. Neots

Re: Fast streaming signal capturing problem

Post by Martyn » Thu Nov 03, 2011 1:37 pm

Are you running the Fast Streaming example as supplied or have you made any changes ?
If you disable Channel B does this change what you see ?
If you put a live signal into the scope do you still see the glitches ?
Technical Support Manager

Post Reply