Search found 304 matches

by AndrewA
Fri Oct 25, 2019 8:27 am
Forum: PicoLog
Topic: ADC-24 PICOLOG 6 Ubuntu server 16 support
Replies: 1
Views: 3030

Re: ADC-24 PICOLOG 6 Ubuntu server 16 support

No PicoLog 6 requires a GUI to operate. We also have a SDK and code examples available from our GitHub repositories, to write your own software. See- https://github.com/picotech for details The main code examples are written in- C, C#, VBA Excel, Labview, MA...
by AndrewA
Fri Oct 25, 2019 8:00 am
Forum: LabVIEW
Topic: Help with LabVIEW Setup
Replies: 2
Views: 4297

Re: Help with LabVIEW Setup

Hi, For 32-bit LabVIEW you need 32-bit SDK, or for 64-bit LabVIEW you need 64-bit SDK You can install both if you wish. You can download the Software Development Kit from our website at: https://www.picotech.com/downloads Step 1, select your 'Series' ...
by AndrewA
Thu Oct 24, 2019 3:57 pm
Forum: .Net Languages (C#, VB.Net, .)
Topic: Streaming DataRate
Replies: 2
Views: 4123

Re: Streaming DataRate

Hi, For streaming with the SDK I would recommend at least a buffer size of 1M samples and calling psXXXXGetStreamingLatestValues function 1/3 to 1/2 of the collect time to full this buffer. So if it takes 1 second to capture 1M samples, call psXXXXGetStreamingLatestValues every 1/3 to 1/2 of a secon...
by AndrewA
Tue Oct 22, 2019 3:30 pm
Forum: LabVIEW
Topic: PicoScope 3000: Getting a sampling time of 1ns or lower
Replies: 2
Views: 3864

Re: PicoScope 3000: Getting a sampling time of 1ns or lower

Hi, Error code 5043 is (5043 - 5000) = 0x0000002B hex. PICO_INVALID_SAMPLE_INTERVAL = The sample interval selected for streaming is out of range. In streaming mode the 3206D is limited 125 MS/s (SDK) due to the USB controller in the scope. This rate shared between all enabled channels. 125 MS/s is 8...
by AndrewA
Wed Sep 25, 2019 10:21 am
Forum: Getting Started
Topic: Set up condition for stopping capturing the data
Replies: 4
Views: 1863

Re: Set up condition for stopping capturing the data

Hi Link, From what you describe you want to configure the scope to run in streaming mode, but this only allows for one trigger event and cannot be reset! So it may not be worth trying to configure a trigger. You could look at writing your own code to detect multiple trigger events. FYI- To setup a t...
by AndrewA
Wed Sep 25, 2019 7:43 am
Forum: LabVIEW
Topic: PicoScope5000a PicoErrorHandler.vi missing/not linked
Replies: 3
Views: 5798

Re: PicoScope5000a PicoErrorHandler.vi missing/not linked

Hi,
This is because the link the "shared" Subrepo is currently broken.
The "shared" folder should link to-
https://github.com/picotech/picosdk-ni-labview-shared
by AndrewA
Fri Sep 20, 2019 2:22 pm
Forum: Getting Started
Topic: Set up condition for stopping capturing the data
Replies: 4
Views: 1863

Re: Set up condition for stopping capturing the data

Hi,
Which model PicoScope do you have?
Can you post image of an example waveform you want to capture?

All the trigger types are listed on pages - 158 - 6.7.2.1 Advanced Triggers dialog -
https://www.picotech.com/download/manuals/picoscope-6-users-guide.pdf
by AndrewA
Fri Sep 20, 2019 1:54 pm
Forum: LabVIEW
Topic: PicoScope5000aExampleBlockMSO.vi - Program runs and then stops with no error code
Replies: 1
Views: 3221

Re: PicoScope5000aExampleBlockMSO.vi - Program runs and then stops with no error code

Hi, Could you please email support@picotech.com And supply following details- Is this the 32-bit or 64-bit version of LabVIEW? And are you using the 32 or 64-bit version of the code? What version of the SDK do you have installed? Are you using the default settings on the front panel? Or have you cha...
by AndrewA
Fri Sep 20, 2019 12:52 pm
Forum: PicoLog
Topic: Put calculus functions into Picolog
Replies: 4
Views: 3527

Re: Put calculus functions into Picolog

Hi, I have added your info to the new feature request. :D
I think this would be a good feature!
by AndrewA
Fri Sep 20, 2019 12:43 pm
Forum: USB PC Oscilloscopes
Topic: PicoScope 2204a, PicoLog 6 on Raspberry Pi 4
Replies: 1
Views: 1792

Re: PicoScope 2204a, PicoLog 6 on Raspberry Pi 4

Hi, PicoLog 6.1.13 onwards only works on Raspbian Buster. We recently tried to force a sudo apt dist-upgrade from Stretch to Buster and broke the OS. So the advised route is to download the Buster ISO fresh from the RaspberryPi site. Of course we still have legacy versions of PicoLog, anything up to...
by AndrewA
Fri Sep 13, 2019 9:06 am
Forum: Pre-Sales Advice
Topic: Iimpedance spectroscopy
Replies: 1
Views: 3735

Re: Iimpedance spectroscopy

Hi, You want to try doing a spectrum plot of real and imaginary parts of the signal like image on the top right of - https://en.wikipedia.org/wiki/Dielectric_spectroscopy? We have some maths channel examples that do this already for...
by AndrewA
Wed Sep 11, 2019 9:52 am
Forum: PicoScope 6 for Linux
Topic: Unable to install picoscope on ubuntu mate
Replies: 3
Views: 3920

Re: Unable to install picoscope on ubuntu mate

Hi, We do not have a version of PicoScope software for the arm platform. But you can install drivers and library files to write your own software to use our PicoScopes and dataloggers. See the section "Drivers for Raspberry Pi" at the bottom of https://www.picotech.com/downloads/linux NOTE we curren...
by AndrewA
Tue Sep 03, 2019 12:03 pm
Forum: LabVIEW
Topic: How to detect the Current Probe Programatically through labview in pico 3000 series scope
Replies: 2
Views: 8018

Re: How to detect the Current Probe Programatically through labview in pico 3000 series scope

Hi, The BNC probe interface on all the 3000 series scopes are completely passive. There is no way to detect the probe connect. So using a current clamp or sensor, the scaling will have to be coded yourself. This scaling could fixed or controlled via front panel button etc. Especially if you have a c...