I seem to have problems with the measurement on the 3406B. I am using PicoScope 6.6.50.3. The setup is watching a single channel A only, 500 us/div, 5 volt range, channel A on the compensation signal from the scope, so it is about 1 kHz. Trigger at 1 V in middle of display. I then enabled two measur...

I have a new 3406B, and I can't seem to get all the sample memory to work. I am using PicoScope 6.6.50.3. If I use a single channel at 100 ms/div, and ask for 200 MS, I get 62,500,005 samples at 62.5 MS/s. If I enable a second channel, still at 100 ms/div, I get 31,250,005 samples at 31.25 MS/s. If ...

I tested it with 6.6.46.1 and got the same results. Will send the psdata file as requested.
The version you listed was not available...

I have a 4424 displaying 2 channels, A and C. I only get part of the C channel displayed. How much displays depends on the contents of the A channel. See attached display. Is this normal?

I have a 3424, and for the measurement you want, just set it to 100 mS/div, 2 M samples. It will use streaming mode and sample at 1 MS/s, giving 1 Meg samples for each channel, recording 4 channels at a time. A bit better resolution, and much longer capture. You can also do 200 mS/div, and get 1 MS/...

I have uploaded a video of this problem: http://screencast.com/t/ICv0gLLdJF I played with it some more, and have some clarification to get it to happen. I had not mentioned steps 4 and 5 before, but they must be done to get it to happen. Setup as follows: 1) 500 kHz square wave. 2) 200 uS/Div. 3) x8...

I get some strange graphics updates of my waveform when I am in zoom mode on my 3424 (using 6.5.42 on XP). To reproduce, just capture a 500 kHz to 1 MHz square wave at 200 uS/div with 50k samples, then zoom to X8. Now move your mouse over the square at the lower left (or lower right, depending on wh...

That does appear to be the same. I put a video up also, to show the problem when I do it: http://screencast.com/t/OTllMDdkMzA This shows another display problem that seems to have appeared also. The second half of this shows the problem I talked about. BTW, I just loaded Jing, which I discovered fro...

Hi Ziko, My version is 6.4.64.0 I have attached the psdata file of when it occurred. I also experimented a bit more, and found that as soon as I saved the psdata file, it fixed itself! I tried it several times. The sequence to recreate is as follows: 1) Bring PicoScope up from icon on desktop (not a...

I seem to have a wierd problem where the resolution enhance feature does not always work when I have Sin(X)/X turned on. I have a 3424 set to 16 bit resolution. At first, I get no enhancement. If I then turn off the Sin(X)/X, the enhancement starts. Then sometimes, when I turn it back on, it stays e...

Hi, I currently use your 2105 and 3424 products. I have a need for a new version that I think the 4424 or 4423 will work well for. I am considering one of the automotive kits, as I can use several of the items included. The scope would be used for general electronics probably a bit more than for aut...

I use PicoScope 6, and the only setting file I see is the "startup settings", of which there is only one. If I set that for the 3424, it is wrong for the 2105, and vice versa. Is there a way to get named settings files?

I am using PicoScope 6. Can I have both loaded at the same time? I thought I had to uninstall PicoScope 5 to get PicoScope 6.

Is there a plan to allow block mode for 200 mS or slower in the future for PicoScope 6?

I have two PicoScopes, a 3424 and a 2105. I switch regularly between them. It would be nice it there was a way I could quickly tell which one is being used, like displaying the model number in the title bar. I know you can get it by entering "Help" --> "About PicoScope", but it would be nice to see ...

I am using the 2105 with PicoScope 6 and have problems when the sweep rate is 200 mS/div and slower. I have a repeating signal that I am trying to capture that comes by randomly about every 10 or 20 seconds. The preTrigger is set to 10%, "Repeat" mode. The display shows the first division only most ...