Hi there, Thankyou for your inquiry with regard to your temperature monitoring requirement. Unfortunately due to the unique requirements of your temperature logging requirements we do not have any products that benifit you. Just as a point of interest please see one of systems that can be used howev...

Dear Helen, Thank you for your inquiry with regard to a data logging solution that would suit your requirements. The data logger you mentioned namely the TC-08 is a PC based device and needs a PC permanently connected in order to facilitate logging. One option that would suit your requirements is po...

Dear Aida, Thankyou for your inquiry with regard to your current monitoring application. One possible available to you is the current monitoring kit. With the Current Monitoring Kit you can measure up to 3 currents at once (either 3 separate circuits, or one 3-phase supply — the choice is yours). Me...

Hi There,

Thank-you for your inquiry with regard to the linux driver. You can use the functions described in the ps2000pg.en.pdf.

If you have any specific questions with regard to the functions you can also contact support@picotech.com

Kindest regards,

Stuart
Technical Specialist

Hi There,

Thank-you for your inquiry with regard to the release of Linux libraries. We are still working on this request and unfortunately cannot give a specific time due to major projects which are currently active.

Kindest regards,

Stuart
Technical Specialist

Hi there, In the accessory kit of the 2104 is an in-line adabtor which can be directly coupled to the scope. Once the in-line adaptor is connected you will need to purchase a female to female bnc adpabtor. Please proceed to link below. http://cpc.farnell.com/1/1/89-connector-bnc-line-f286.html Once ...

Dear Adam, Thank-you for your inquiry with regard to a scope suitable for your application. Please proceed to the following link for details for details of PicoScope 4226 and 4227 which are precision USB oscilloscopes that are suitable for general, scientific and field-service use. With 12-bit resol...

Dear Pappuneelam, Thank-you for your inquiry with regard to using 2203 .The 2203 will operate in both our Logging software and Oscilloscope software. Due to your required sample rate PicoLog will not be suitable for RS485 data logging You could possibly use PicoScope to capture your RS485 data. If y...

Hi There, Thankyou for your inquiry with regard to capture/analyze (digital) ISDN (BRI/PRI) signals. In theory you could could use two channels at use the maths functionality to obtain the differential measurements. In order to assist you further please could you proceed to the following application...

Thankyou for your inquiry with regard to a Pico Scope 2203 open source libusb driver.

Unfortunately we cannot offer you a facility in this format.

If you require further assistance please do ont hesitate to contact me at support@picotech.com

Kindest regards,

Stuart
Technical Speciliast

ear MrGnome, Thankyou for your inquiry with regard to your 3206 using PicoScope 6. In normal (fast) sampling mode, PicoScope collects enough data to fill the scope view, then redraws the whole view at once. This method is suitable for fast timebases, when the whole process repeats many times each se...

Dear Spaceball, Thankyou for your inquiry with regard to reading USB devices with PHP lanuages. As long as you can use the suppled .dll from the SDK it might be possible. Pico Technology data acquisition products are supplied complete with application software (PicoScope, PicoLog or EnviroMon) which...

Dear LDBennett, Thankyou for your inquiry with regard your 2104 and associated attenuation inquiry. PicoScope has a built-in library of common probe types, such as the x1 and x10 voltage probes used with most oscilloscopes, but if your probe is not included in this list you can use the Custom Probes...

Dear Sir, Thankyou for your inquiry with regard with regard to PicoLog. Apologies you have encountered some difficulty. Please could you send over the file to support@picotech.com Please could you proceed to the following link and download the following version of PicoLog. http://www.picotech.com/so...

Dear Sir, Thankyou for inquiry with regard to vector network analyzer application in respect to the 9000 series. The 9200 can't directly work as a VNA or NA. It can wwork as an oscilloscope, then with the help of FFT it can work as a spectrum analyzer with a limited resolution. The PicoScope 9201 us...