If you use DeepMeasure you can hover over the cycle numbers with the cursor and get the individual cycle paramteres on screen for the chosen cycle

You may be able to use deep measure as shown here the number of cycles in the table gives the count

This error is normally due to the PicoScope Support Toolbox not being present, this can be added though AddOn manager, just search for "PicoScope Support Toolbox"

You will also need to add "PicoScope Support Toolbox" from AddOn manager

Download ps4000awrap.dll from
https://github.com/picotech/picosdk-c-w ... s%2064-bit

and put this in

C:\Program Files\Pico Technology\SDK\lib

Hopefully that will get you going.

Frequency Response Analysis
https://www.picotech.com/library/picoap ... bode-plots

Forum Discussion
topic14311.html

The Serial Decoder only pulls down 20MSamples for decoding, the data is downsampled on the device, so even though the device is sampling at 500kSamples/second you won't get that for decoding. The full buffer contains 250MSamples so 20MSamples for decoding means you are getting less than 5 samples pe...

If you select decode between time rulers and then place the cursors as shown, the framing errors disappear. BetweenCursors.png When you enable serial decoding it downsamples data to process, as you have plenty of trace with no data with your settings this results in around 5 samples per bit of the s...

You could save the current waveform rather than the whole set, which may reduce the file size. Otherwise put the file on a file server and send a link to support@picotech.com

Can you post a psdata file so that we can try a few different options on your data.

Can you post a psdata file showing this.

I am sorry you are experiencing issues with your PicoScopes and PicoScope 7 software, hopefully we wil be able to resolve your issues and concerns. To start the process of identifying and resolving your issues I will need details of your setup PC Hardware Operating System Version of PicoScope 7 soft...

This is an old thread and relates to PicoScope 6 exporting of MAT4 format files. PicoScope 7 exports a later version of file so shouldn't have this limit. Can you please email support@picotech.com to discuss your issues. If you can send a psdata file that you wish to import into Matlab but is giving...

Are you sure, I just checked and 2204a says it includes a twin pack of probes, 2204a-d2 says it is supplied without probes.

In the latest release of PicoScope 7 Early Access 7.1.17 we have added a new option on the Manchester Decoder setup panel. This allows you to specify the number of edges to ignore at the start of a packet. For normal Manchester this is set to 1, but for signals such as this RC5 set this to 0. The do...

Can you make sure that you have a fully up to date O/S, in particular .NET, and that the graphics drivers are the latest available from the graphics chip manufacturer, and not the PC manufacturer. If this does not improve the performance can you please email support@picotech.com where the team will ...