Hi

Yes this is entirely possible with Dr DAQ. Please ensure the sampling specification meets the needs of your application.
PicoLog can be used to log and DDE macro to import data to Excel.

Hi

Sorry to hear you having problems with the 'roll-back'. This is a know issue and is being addressed.
A way round this is to use an earlier installation R5.11.08 available here:
http://www.picotech.com/software-archive.html

Hi I suggest you start by looking at the input range of the loggers here: http://www.picotech.com/datatable.html Using the Terminal board is is possible to offer higher voltages and construct a potential divider network to drop input voltages. PicoLog could be used to monitor PIR activity and displa...

Hello Thank you for your post. The Automotive kit prices are here on the web site. http://www.picotech.com/auto/diagnostic-kits.html Two channels can be fine for most needs but 4 channels adds a bit of versatility when required. Over 50V for injector and primary ignition is taken care of by the 20:1...

Thanks for sharing this with us Frank.

Hi
Thanks for your post

Please completely uninstall your old version of Picoscope software and then install the new version. There is somethimes an installer conflict which should not be there with future versions.

Thanks for the good comments.
Remenber we are here to support you if you need it !

Hello

Thank you for your post.

Please contact support@picotech.com with the details of the files you are trying to open or even attach them for us to take a look at.

Hi

Thank you for your post.

There were some improvements included in the last revision relating to this. Please send more details of your specific 'crash' to support@picotech.com with the software version you have installed.

Hi Alex
Thank you for your post.

The macro is not included with the supplied sofware but if you contact support@picotech.com we will email the macros to you.

Hello Bob

Thank you for your post.

Drivers for the 2202 are currently being worked on and will be available in Beta release form in within the next week or so. Please apply to support@picotech.com directly to request the drivers if you are still in need of them.

Hi

Thank you for your post.
PicoLog has support for only 4 Humidiprobes as do the drivers should you write your own software.
Please contact support@picotech.com to discuss an option to provide you with a 'special' version of PicoLog with the suppport you require.

Hi

Thank you for your post.

What device are you using ?

Hi The noise free resolution of any oscilloscope depends on the voltage range selected, sampling rate, memory depth used etc etc so is almost impossible to quote. Using the scope and specifications you list we got about 7mV RMS of noise on the 5V range. If you wish to reduce the noise / increase the...

Hello Larry Thank you for your post. As you are interested in data capture over time, your application calls for a data logger rather than an oscilloscope which is included in the kit you mrntioned. Please take a look at our data logger range here http://www.picotech.com/data.html Also have a look a...