Can you post a pasta file showing what you are seeing.

If you have a scope attached that has a Generator then the option can be found here If you are running demo mode then it is not possible to change the signals.

Device specific setup for PicoLog 6 can be found in the User Guides TC08 https://www.picotech.com/download/datasheets/tc-08-thermocouple-data-logger-users-guide.pdf PT104 https://www.picotech.com/download/manuals/pt-104-prt-data-logger-users-guide.pdf CM3 https://www.picotech.com/download/datasheets...

You need to be using the reset button at the top of the window ResetDataorConfiguration.png Chose "Reset data" if you wish to keep the same device settings, or chose "Reset configuration" if you want to set all devices from scratch. There are various pop ups in the application that have a "Don't Sho...

Measurement logging is a new feature in PicoScope 7, and we are encouraging user feedback so that we can make improvements. Your comments are most welcome and the relevant teams have been maded aware of them.

Which PicoScope Model are you referring to?

If you can find out the serial number of the PicoScope 9211A and send the details in to support@picotech.com someone canlook into this for you.

Please email this information to support@picotech.com and the team will be able to discuss this with you. The device may need to be returned for repair.

The Min Max statistics apply across multiple waveforms, not to different cycles within the waveform.

This is something we aware causes confusion so will be looking at this in the future.

In the backend it is showing that you did tick the box

What third party FFT library are you using, our code and examples will only produce time domain data.

In the PicoScope software we make use of the Intel IPP libraries, but there may be others out there that you can use.

You are currently set to measure the average value across the whole trace if you try the ruler options by clicking on the measurement you will get the correct values,

Alternatively DeepMeasure will give you values for all cycles in the trace.

Can you please email support@picotech.com with the contents of

Windows
C:\Users\%username%\AppData\Local\Pico Technology

Linux
~/.local/share/Pico Technology/

just after you have encountered a crash, as well as a psdata file showing the setup.

First simple check is to make sure that the PicoScope application is not running.

The example code is hosted here https://github.com/picotech