Hi, Thank you for your questions. The ADC-11 does normally only measure voltage in the range 0-2.5volts. However, there are different number of specials, but if you went for the ADC-11 special that can measure -2.5 to +2.5 volts then in the QBasic example you would need to change the ADC count to vo...

Hi, I am sorry to hear that you are experiencing this problem. Once setting the PS3206 up with the 1kHz Square trace. The probe normally gets adjusted by the adjustment screw located on the probe handle first. The adjustment resistors very rarely need to be adjusted. I would advise that you try it a...

Hi, I am sorry to hear that you are experiencing this problem. When you open Picolog, go to the input channels, by Settings | Input channels. When you have the channel names displayed double click the channel name that is reading -0.4 to +0.4 and then select the Options button, when the channel info...

Hi,

Thank you for your email. Unfortunately, I do not know enough about the omega thermocouples to advise you cortrectly, but I would advise you to contact:

www.kalstead.co.uk

They will be able to help you greatly with your questions and they are familiar with out TC-08.

Best regards,

Hi, Thank you for your email. Unfortunately, having a cable of 150 metres of PT100 cable might increase the noise sufficiently to give inaccurate temperature readings. A possible solution to this would be to use the Enviromon system with the EL041 and thermocouples. The EL041 can be placed closer to...

Hi,

I am sorry to hear that you are experiencing this problem.

I have replicated this problem as stated and passed it on to the development department, unfortunately there is no time scale I can give you for when the fix will be available.

Best regards,

Hi, Thank you for your post. It is possible to measure 4-20mA with our equipment. This can be achieved by using a shunt resistor between gnd and channel. The software can the use scaling files to convert it to a pressure unit. I would recommend that you look at the ADC-11/12, this is an 11 channel u...

Hi, Thank you for your request. A possible solution would be to use a frequency to voltage converter, with the EL037, as most flow meters us frequency to give the flow rate. However, the Enviormon System records a sample every minute so it probably, would not be suitable for fast changes is flow, bu...

Hi, Thank you for the extra information, I will try to replicate this by repeating what you have said and let you know the results ASAP. Unfortunately, it will take a while, as I want to test it for the period you are using yours for. The voltage range you have specified is the one on being used on ...

Hi, I am sorry to hear that you are experiencing problems with understanding the layout for the PLW files. Unfortunately, the help manual is not totaly up to date on the structure used, but if you look at P.F.R post of 16 Apr 04, this gives the correct format. Now that you know this you can use this...

Hi, Thank you for your email. The ADC-212/3 does not come with any connectors for connecting the transducer or any other sensor to it. It does come with a power adapter, parallel cable for connecting it to your PC and the software. All the details about the ADC-212/3 can be found at: http://www.pico...

Hi, I am sorry to hear that you are experiencing this problem. What voltage to range are you using it on and is it DC or AC. The tolerances are as follows: DCA range: 1mV/10mA ±(1.5% ±5mA) 10mA ~ 20A DCA range: 1mV/100mA ±(2% ±20mA) 100mA ~ 40A ±(4% ±0.3mA) 40mA ~ 60A ACA range: 1mV/10mA ±(2% ±5mA) ...

Hi, Thank you for your question. The file format that the results are stored in are .psd (picoscope data files). The size of the file depends on the number of samples taken which is dependent on the unit being used and the sample interval between each reading. These files can be looked at in the fut...

Hi, Thank you for your post. I would recommend that you consider the ADC-212/3. This unit has two channels and multiple voltage ranges. It can be used in Picoscope or Picolog to look at fast events. Unfortunately, we are do not sell pressure sensor, but you could try: rswww.com www.farnell.com Best ...

Hi, Thank you for your post. I believe that the units you would need to measure 2 x temperature, humidity, light and door is the TH-03 and RH-02. The TH-03 has three channels and therefore you can use this for one temperature, light and door switch. To get the other temperature and humidity this wil...