The BNC grounds are common.

The PS3425 Differential Oscilloscpe may be what you require for differential voltage measurement (http://www.picotech.com/differential-oscilloscopes.html).

John

You may have misread what I wrote: 'PicoLog does not offer pulse counting, however, it would be possible to measure frequency with an appropriate logger ...' Also, the digital I/O addressed your question about the ADC-24 not the ADC-11. The Digital outputs of the ADC-11 may only be used if you write...

Hi Tom,

The digital outputs require that you write your own software application.

Details may be found in the user manual http://www.picotech.com/document/pdf/adc11-en.pdf and in the SDK http://www.picotech.com/download.html

Regards
John

Which release of PicoLog are you using and under which operating system?

John

Kay,

The PS5203/4 may be set to 0.03 Hz from within PicoScope 6.

Regards
John

There is just one version of DrDAQ and you may find full details at the following links: http://www.drdaq.com/sensors.html http://www.drdaq.com/index.html You may use 3rd Party sensors and you will find sensor advice in section 2.7 and 2.8 of the user guide http://www.picotech.com/document/pdf/drdaq...

The digital I/O may be configured as alarm outputs, and care must be exercised when using those, as they are 3v3 logic based and, appropriate interfacing must be used to drive external devices. PicoLog does not offer pulse counting, however, it would be possible to measure frequency with an appropri...

Hello Kay,

That is as low as you may go with the PS2203/4/5.

Regards
John

Hi Jan,

There are two different SDKs for the ADC-11 ... Parallel and USB version.
Which version did you download?

Regards
John

Hello guest,

64-bit Linux drivers are now available: http://labs.picotech.com/

Regards
John

Hello guest, Our data logging software PicoLog (http://www.picotech.com/data-logging-software.html), and Thermocouple data logger TC-08 (http://www.picotech.com/thermocouple.html) could meet your temperature logging needs. If you obtain a flow sensor which outputs voltage or current in proportion to...

Hello guest,

Did the system previously work OK? If so, has any aspect of the system been changed in any way?

John

Martin, It has not been possible to view your settings from within PicoLog, however, inspection of the file would indicate that the 'scaling for graphs' setting may be the cause of this behaviour: Please go to 'Settings' > 'Input channels' and select 'Edit' > 'options', after selecting the channel t...

Hello peiqing,

Type-k is an industry standard, therefore, provided the non-Pico thermocouples comply with Type-k, there should not be an issue.

Regards
John

Hello guest,

Yes, you can use the unit with PicoLog.

Is the version of PicoLog the same as PicoScope?

In any case, try uninstalling PicoLog and install the latest vesion for your operating system: http://www.picotech.com/download.html

Regards
John