Hi Martyn,
Thank you for the update.
I will try the beta version.

Regards,
Benoit

Hi Martyn,

is there any progress regarding this issue?
regards,

Benoit

Hi Martyn, While playing around to create samples for you, I noticed that if I zoom enough, the digital data will appear (forMartyn3_BAD.psdata) Please refer to the included picture: Thank you for the files, I have seen the same effect with the release version of the software 6.6.50 the data reappe...

Hi, could I get some feedback from PICO on this question please? I understand that this might not be possible at the moment but it would be a nice feature. Ex, let the user chose the margin size between 3-8 char display. snapshots of the waveform would be more meaningful when shared with other peopl...

Hi Martyn,

Theses are the specs of my laptop

ACER 1830TZ-4472 (bought in sept 2011)
Pentium Dual core U5600 1.3GIG 3M L3 cache
4GIG DDR3
WIN7 Home premium.


Only firefox is running in parallel.
Computer is not acting sluggish,
And picoscope seems very responsive
Thank you for your help

Ben

Let me add a short video showing what I mean... The extension mp4 is not allowed. OK, in zip: The file is too big, maximum allowed size is 256 KiB. the file is 371K This is getting ridiculous... You will find the file digitalzoom.mp4 on filedropper Again: http://www.filedropper.com/digitalzoom Ben P...

Hi Martyn, Thank you for your support. Unfortunately, the files that show the behavior are more than a Meg in size... so I get The file is too big, maximum allowed size is 512 KiB. when I try to load them. So, I placed them on filedropper: http://www.filedropper.com/formartyn So far the only wavefil...

PicoScope® 6 - PC Oscilloscope software version: 6.6.50.3
Model: PicoScope 3206MSO

Saved waveform does not contain the digital data:

When I save all waveform, the digital data does not seem to be saved:

hi, I am using my scope in mix mode to look at a glitch on a digital signal. the analog probe is probing the faulty digital signal, and I clearly see the glitch. but, when I use the zoom box only the analog portion get zoomed, so the glitch is not in sync with my digital waveform. am I doing somethi...

3206-MSO increase display left margin: Hi, I am using a 3206-MSO with a Raspberry PI & gertboard. I renamed my digital channels to: BUF1 (D0) .. BUF7 (D6) Unfortunately, in picoscope, I only see BUF (I need to hover over the signal to see the full name "BUF1:D0"), and I did not find a way to increas...

Hi all, I am a French Canadian (explains my limited wording) who works in the ASIC department of a graphic chips company. I am working all day long in front of a computer. I am a strong UNIX user, and a limited Linux user. Kids are getting older, so I can start again playing with electronic stuff. I...

Just getting familiar with my new toy (3206-mso), I captured the led test on the gertboard (leds-wp.py) using the digital probe. I need to figure out the reason why there is a discontinuity on BUF7 (channel 6), It is not the scope, because switching probes give the same result on the newly assigned ...

Hi, I feel the documentation regarding the probe could be improved. With a scope equipped with an AWG, I guess we could use the AWG to calibrate the probes, but there is no direct procedure in the menu to achieve this, nor any mentions in the help files. Even my 20mhz leader scope has a cal connecto...

I received the scope & case today.

You were right,
I used an old fashion razor to cut the foam in the front and in the back of the picoscope case.
I am left with 1/4 inches from the back, but this is fine, as the back of the case is lying against the padding.

Ben

Hi, Greetings from Canada, I just ordered a 3206 MSO from your Canadian distributor (interworld). From the description, I understand that the PicoScope Carry Case is not compatible with my scope. Do you have plans to build a case for the MSO series, or do you have any generic case that you know othe...