The 3424 model is not automotive scope and hence will not work with Picoscope automotive versions of the software. You can use the main test and measurement version - picoscope 6 with this scope - https://www.picotech.com/downloads/_lightbox/PicoScope6 PS - Standard Automotive models (3223, 3423, 42...

Hi, Tomtam,
Yes could you attach your program, and I will try it out.

Hi Hailey, 1. Differences between 'file save as' csv and 'Copy as text' I found a number differences between the two- -The waveforms start at a different place compared to picoscope. -'Copy as text' has a few more samples. -If a low pass is applied to channels the 'Copy as text' samples are not filt...

Hi, Tomtam,
Yes you will need to run the 'command prompt' as administrator.
(start menu - cmd - right click on cmd.exe - click 'run as administrator' )
I would suggest you use the beta version of picoscope 6 to avoid this issue-
Point1 - topic19941.html#p62601

Yes the scope probes can pickup RF if the signal is a high signal level.
The probe must have been picking up the RF from the buck converter itself.

Hello, The command of Measurements.CSV? entered in Command Prompt, and running away. This issue does not happen with the beta version. You can download the beta from the download page. If do find this issue with the beta please post the issue here again with the psdata file. The NaN seem to to be re...

Using Picoscope.com /a Measurements.CSV? >> measurements.csv will append each measurement to the file. Each line/row after 0ms: Measurements.CSV? is a whole Measurement. ie Channel, Name, Value, Min, Max, Average, StD, Capture Count Sapn A,AC RMS,999.5 mV,999.5 mV,999.5 mV,999.5 mV,0 V,1,WholeTrace,...

Hi, To do this open command window and type C: cd :\Program Files (x86)\Pico Technology\PicoScope6 or for 32 bit systems cd Program Files\Pico Technology\PicoScope6 Enter the following command to export the measurement(s) to a csv file- Picoscope.com /a Measurements.CSV? >> m...

Hello, What version of picscope 6 are you using? You can find the version from the Help menu - About picoscope 6 I tried out "Measurements.CSV?" command with the current stable beta builds with no issues. NaN, standing for not a number, is a numeric data type value representing an undefined value. I...

Yes this setup should work, are you using the stable version of picoscope? Yes it is possible to decode SPI using the 2204A. I would highly recommend you try the new PicoScope 6 Beta software which has a much improved serial decoding feature. As the current stable version has some serial decoding is...

Hi Mike,

Please see this post-
topic10103.html?hilit=iogear#p43651

We have tested this device over both Wifi and ethernet connections.
See the attached setup instructions.

Hi Aaron, The Picoscope application ('picoscope.exe') looks in its folder for the dll's, to use. (ie "C:\Program Files (x86)\Pico Technology\PicoScope6\") The SDK installers will always add it's location to the start of the windows PATH environment variable. If you were deploying your own applicatio...

Hello Ulrich,

I would remove the 100ms delay. You may still find you have a vertical edge in the waveform when changing frequencies.

Hi Tarmimi, You cannot request a sample interval (sec)from the scope, you can only set a timebase number. See the timebase section of the programmers guide, which has the formula, for the model of scope you are using. The input being fed back is the actual number of samples returned from ps5000aGetV...

Hi Tarmimi, The number of samples is not related to the sample rate (Hz)/ sample interval (s) You are correct to convert between sample rate (Hz)and sample interval (s), you just take the inverse of the number. ie sample rate (Hz) = 1/ sample interval (seconds) And sample interval (seconds)= 1/sampl...