Hello Nathan,

Thank you for your post.

It is difficult to tell if there is a problem with the scope.

However, you can try uninstalling your scope from the device manager and reinstalling the drivers. If this doesn't help, you will need to email us at support@picotech.com

Best regards,
Michael

Hello,

The ADC16 is a serial port product. YOu may be using a USB to Serial converter. If so, you will need to point the software to the correct serial port assigned to the adapter.

If you are still having problems with this, please let me know.

Best regards,
Michael

Hello, Thank you for your post. Our pH probe is suitable for continuous measurement. However, we recommend that you periodically check and clean the probe and test the accuracy with known pH values. This customer of ours uses our DrDAQ unit with custom software. We do not support this software but o...

Hello Guest,

THank you for your post.

We have not had reports of this problem before. Have you downloaded and installed the latest software?

www.picotech.com/software.html

Please try this and let me know how things go.

Best regards,
Michael

Hello,

We are currently looking into this.

Please keep checking for updates.

Many thanks,
Michael

Hello,

Can I ask you both to download and install the latest version of PicoScope.

www.picotech.com/software.html

Many thanks,
Michael

Hello,

We are looking into this.

I cannot promise a solution straight away so please bear with us.

Best regards,
Michael

Hello,

We have fixed the graphing problem. Please check shortly for an announcement.

Best regards,
Michael

hello,

The TC08 settings will allow for Voltage or temperature meaurements. These other settings are for other loggrs such as 3000 series.

THe software will allow you to monitor voltage or temperature.

Best regards,
Michael

Hello,

This sounds like a programming error.

It could be a number of different things. Check your variable declarations and look for any accidental maths in your arrays.

Further information is required if you need further help.

Best regards,
Michael

Hello Anton,

Sorry to hear of your difficulty.

YOu will have to give us a bit more information. What version of the software do you have, Windows version, ADC11 USB or parallel etc

Let me know.

Best regards,
Michael

Hello, Thank you for your post. Our EnviroMon data logger system is the only current stand alone data logger in our range. THis system will obtain store a sample every 1 minute at the fastest. YOu can connect via a modem for remote diagnostics. For further information about this product, please visi...

Hello,

Thank you for the post.

YOu can extend your parallel cable. I would recommend that you use IEEE 1284 rated cable for signal integrity. Alternatively, you can use our USB Parallel port adapter and extend the range by USB.

Best regards,
Michael

Hello, YOu can do this with Access and VBA code. However, we cannot write this for you so we have supplied an Excel example with the software. Please check your .../Pico Full/ directory. YOu will need to gather a single or block of samples and pass these into a new record for each reading. You will ...

Hello, Thank you for your enquiry. The PicoLog software will support multiple devices, therefore you can use a voltage input data logger to sample the voltages you are looking for. Remember, you can reduce the input voltage using a Potential Divider. Please visit: http://www.picotech.com/data.html B...