Search found 3994 matches

by Martyn
Tue Jun 29, 2021 5:56 am
Forum: PicoScope 6 for Linux
Topic: Failed to install driver for Ubuntu
Replies: 14
Views: 12479

Re: Failed to install driver for Ubuntu

Can you try adding the no-check-certificate option

Code: Select all

wget --no-check-certificate -O - https://labs.picotech.com/debian/dists/picoscope/Release.gpg.key | sudo apt-key add -
by Martyn
Mon Jun 28, 2021 7:27 am
Forum: PicoLog
Topic: Bug: Channels get mixed after some time
Replies: 2
Views: 6144

Re: Bug: Channels get mixed after some time

We are investigating this issue and would like you to send in a .picolog file showing the channel swapping to support@picotech.com and the team will be able to follow up on this with you.
by Martyn
Fri Jun 18, 2021 1:48 pm
Forum: Projects
Topic: Capture and compare using 2405A
Replies: 2
Views: 1907

Re: Capture and compare using 2405A

I would suggest that the use of reference waveforms may be a good way to achieve this. Please see the appropriate section in the A-Z https://www.picotech.com/library/a-to-z
by Martyn
Fri Jun 18, 2021 1:29 pm
Forum: USB PC Oscilloscopes
Topic: Trigger on transmissions stopping
Replies: 1
Views: 1294

Re: Trigger on transmissions stopping

Can you post a psdata file for this so that we can take a look at all the settings.
by Martyn
Fri Jun 18, 2021 7:33 am
Forum: USB PC Oscilloscopes
Topic: 2205A settings for CAN trace
Replies: 1
Views: 851

Re: 2205A settings for CAN trace

Do you mean use the device for CAN Serial Decoding? Technically yes as the serial decoding is performed post data collection in the software, however the low on board memory of the device will limit the amount of data you can collect. If the device switches to streaming mode to use the PC memory the...
by Martyn
Fri Jun 18, 2021 7:28 am
Forum: Pre-Sales Advice
Topic: PicoScope 9341-25
Replies: 1
Views: 795

Re: PicoScope 9341-25

The 9300 are sampling scopes, the 9400 are SXRTO.

To fully discuss your requirements please email support@picotech.com and a specialist RF application engineer will be able to assist you.
by Martyn
Fri Jun 18, 2021 7:22 am
Forum: LabVIEW
Topic: Connecting PS 5443D to LabVIEW
Replies: 3
Views: 3723

Re: Connecting PS 5443D to LabVIEW

The error code 5003 means the device can't be found. This may be due to not installing the correct SDK from our downloads page to match your LabVIEW version 32bit or 64bit https://www.picotech.com/downloads, or more commonly because you are trying to run the ps5000 examples and not the ps5000a ones ...
by Martyn
Tue Jun 08, 2021 5:43 am
Forum: General Software Discussions
Topic: nosetests for picosdk-python-wrappers
Replies: 4
Views: 779

Re: nosetests for picosdk-python-wrappers

The person who wrote this is no longer at Pico but I believe it means to run the tests at the root level of the repository located in the test folder https://github.com/picotech/picosdk-pyt ... aster/test which are nosetests, and not run a script called nosetests.
by Martyn
Mon Jun 07, 2021 5:29 am
Forum: General Software Discussions
Topic: nosetests for picosdk-python-wrappers
Replies: 4
Views: 779

Re: nosetests for picosdk-python-wrappers

Code: Select all

To run the unit tests, you will need to install nose (e.g. pip install nose.) Then, run nosetests in the root of the repo.
This is referring to the additional package "nose" which you need to install, it is not part of the picosdk-python-wrappers
by Martyn
Wed Jun 02, 2021 8:14 am
Forum: USB PC Data Loggers
Topic: TC-08 - How many Terminalboard 4-20 mA can i connect?
Replies: 1
Views: 2670

Re: TC-08 - How many Terminalboard 4-20 mA can i connect?

Where did you see "2x5V max as a restriction"

In theory you can connect 8 terminal boards to the TC08 as it is just measuring a voltage that is scaled appropriately, the same with 4-20mA
by Martyn
Sat May 29, 2021 7:44 am
Forum: LabVIEW
Topic: Picoscope AWG LabVIEW
Replies: 2
Views: 798

Re: Picoscope AWG LabVIEW

When the red led goes off the AWG should be generating an output on the BNC. What have you connected this up to as you will see nothing in the LabVIEW example.
by Martyn
Fri May 28, 2021 5:58 am
Forum: MATLAB
Topic: Channels A and B simultaneous trigger configuration (PS2203)
Replies: 4
Views: 1369

Re: Channels A and B simultaneous trigger configuration (PS2203)

Yes the 2204a can be used with logic triggering on two channels
by Martyn
Thu May 27, 2021 8:26 am
Forum: LabVIEW
Topic: How to remove PICO LOGO in Open VI
Replies: 1
Views: 718

Re: How to remove PICO LOGO in Open VI

Please contact support@picotech.com to discuss this
by Martyn
Wed May 26, 2021 10:19 am
Forum: PicoScope 6 for Windows
Topic: Serial decode table not present
Replies: 4
Views: 904

Re: Serial decode table not present

In the screen view it looks like the table is there but right down at the bottom so you can only see the title - Serial Decoding. Can you move the mouse down to the line between the bottom of the graph and the title bar and the cursor should change to allow click and drag. If this doesn't work can y...