Hi,

This is very simple to do, you multiple the values by your scaling factor (m) then add your offset value.

linear equation-

Hi, Yes the AWG examples are not that user friendly when having to set the frequency and dwell time. You need to use the formula on page 83 (11.50 ps5000aSetSigGenArbitrary) of https://www.picotech.com/download/manuals/PicoScope5000SeriesAApiProgrammersGuide.pdf So you had to calculate the Delta cou...

Hi Steven, I tried this on a 2105 pen scope and version 6.10.11 but the DC coupling worked fine (I have windows 7 64-bit) Could you try the following- Make a backup copy of the folder- On Windows 7/8/10- C:\Users\YOUR_USERACCOUNT\\AppData\Local\Pico Technology\64.............. On Windows XP- C:\Docu...

I made copy of the DrDAQ code and installed Xojo. I did find and replace on the code 'DrDAQ' replaced by 'ps5000a' You also need to delete all the other code linked to other buttons. I managed to get the ps5000aOpenUnit function to work by changing the code of Pushbutton to code below- Declare Funct...

Hi,

Could you email your log files into support@picotech.com.

Hi, It most likely the scope has not 'locked up' when you have selected a higher voltage range. It is still waiting for a trigger. By default the trigger is enabled on channel A, with default level of 16384 ADC count. Trigger level = Voltage range (ie 5v) x (Trigger ADC/MAX ADC) for example; 5 range...

Hi Maziar, I have attached diagram of a LAN tap cable to make for using with our 10/100 BASE ethernet decoding. You can either make the cable from scratch or splice a existing patch cable, and add the BNC connectors. This will only work with scopes with 1M ohm input impedance. Also shown is a screen...

Hi,

Is the PC that's not working a laptop?
Try grounding the USB connector shell to mains earth, with a wire.

Hello Maziar, The 3406D has enough analog bandwidth to for the decoder work correctly. Even our 6404D and 6407 scopes will be limited by size and number of packets when decoding. These models could used to look at the eye diagrams, but one of our 9000 series units would be the best for eye diagrams....

Hello, This problem is almost certainly caused by the thermocouple being used touching something which is at a different potential to the TC-08/PC earth. If this voltage is greater than about +/-7V the channel is pulled out of he common mode range of the TC-08. This causes all channels to read very ...

Hi, Yes you can export the mask pass/fail measurement at the bottom of the Picoscope screen to csv file, by using the command- Picoscope.com /a Measurements.CSV? This gives 0ms: Measurements.CSV? A,Mask Failures,True,6,---,---,---,---,7,WholeTrace, Just remember- A mask Fail is logged as True and A ...

Hi,

Custom probes, are not yet supported on the linux and Mac OSX versions of Picoscope 6.

Hi,

Currently you can not get a RMS value of a signal in a maths channel.
But you can add AC RMS or True RMS measurements at the bottom of the screen. These can be exported to a text file via the command line-
topic20001.html

Forum post to discuss LabVIEW SDK Examples from the PicoApps web page-
https://www.picotech.com/library/picoapps

Hello Ernieguy, A1) You could use one these- Wireless 4-Port USB Sharing Station. This has Wifi/Ethernet connections. http://www.iogear.com/product/GUWIP204/ (We have tested this with our PicoScope's and the PicoScope 6 software) Another option- You can setup picolog software to run in client/server...