Hi

The 4444 needs the USB connection to the PC for power as well as data transfer so there isn't a way to connect it wirelessly to the PC.
What exactly are you trying to do?

Neil

Hi

I have no information about when PicoScope 7 will be available for T&M

Neil

HI Pierre

You can input and output from the DrDaq at the same time from a single device.

Neil

Hi

The PicoSDK no longer contains the example scripts, these can now be found either through the MATLAB addon manager or from our Github page www.github.com/picotech

For a 5000A/B/D scope you will need the ps5000a MATLAB instrument driver addon and the picoscope support toolbox addon.

Neil

Hi The RATIO_MODE_AVERAGE downsampling work on the data in a buffer to average a number of samples equal to the downsampling ratio to create a single sample. There is not a way to average multiple buffers together on the scope, that would need to be done after the buffers are retrieved from the scop...

Hi

It might be worth deliberately turning off the unused channels just to make sure that they are actually disabled.

Yours,
Neil

Hi Sven

PicoScope 7 will be having a T&M release in the future for non automotive applications

Neil

Hi Si

The 256 raw data levels of 8 bit resolution are scaled to 65536 data levels to be returned as a 16 bit number from the scope to the PC. This scaling is all done on the scope.

Neil

Hi

Do you know what the output impedance of the function generator is?

Neil

Hi Hans

A psdata file is a file type that the data can be saved as in PicoScope 6 that would allow me to see your signal and your set up.

Neil

Hi

All of our scopes scale their data to 16 bit values when it is returned to the PC

Neil

Hi The 2204A has overvoltage protection up to +- 100 V so if the voltage is within this range even if it is outside of the +-20 V input range then no damage will occur to the scope or the attached PC. If you are going to be looking at signals with amplitude greater than +-100 V then we would strongl...

Hi Hans

Do you have a psdata file showing the captured signal from your generator?

Neil

Hi

We have examples here https://github.com/picotech/picosdk-python-wrappers and the README details how to get started.

Neil

Hi

Are you able to post a code snippet showing exactly how you're current calling the ps4000SetBwFilter function in python

Neil