Hello,

A standard non-Pico parallel to USB converter will not work with our equipment. Only the Pico USB-Parallel port converter will work with out equipment.

Best regards,
Michael

Hello, Thank you for your post. You follow the order of these events to access the ps3000. The same applies with all programming languages. Open the unit, this will return 0 if unsuccessful or 1, 2 or 3 etc if successful. This handle can be used to address all the other functions required. Set chann...

Hello,

Thank you for your post.

It sounds like PicoLog is looking for the ADC16 on the wrong COM port. Please check your COM ports and try again.

Let me know if your problem persists.

Best regards,
Michael

Hello Rob,

Thank you for your posts.

The input range is fixed at ±2.5v, there is no autoranging included.

If you are writing your own software, you will find this information in the product manuals.

Best regards,
Michael

Hello,

We will give you a report of the fault upon return.

Best regards,
Michael

Hello,

YOu can find the settings files in the Pico directory or look where you have saved your PLW files.

Please post these to: support@picotech.com

Best regards,
Michael

Hello, Thank you for your post. Our current best instrument for this type of application is the ADC216. THis is a 16bit scope designed with audio frequency analysis in mind. With an input impedance of 1 MΩ, this would sit well in your application. Further information is available from our website: ...

Hello,

You are right RobH. THis is why we recommend a IEEE 1284 rated parallel cable. THis cable is shielded to protect the data transport and to prevent stray electrical noise.

Best regards,
Michael

Hello Adel,

Sorry to hear of this.

You will need to return the unit to us for repair I'm afraid. Please contact support@picotech.com for an RMA number and procedure.

You will need to include your scope serial number and address.

Best regards,
Michael

Hello James,

Can you send me your log files? Also, send me your PLSETTINGS.PLS file?

Many thanks,
Michael

Hello,

You will need to use all pins with a straight through connector.

Best regards,
Michael

Hello, Thank you for your post. The PicoLog software will allow you to sample on trigger. This will allow you to save only what you are looking for. To acquire with a different trigger on each channel, you will have to wait for the next version of PicoScope. Users of automotive scopes can see this a...

Hello,

What is it you are trying to achieve? The -d command is reserved for downloading data from the logger. Have you configured the logger yet?

Best regards,
Michael

Hello,

PicoPP.sys is installed with the latest software. The problem may be down to your VB code.

Can you confirm the port numbers you are using with the parallel port adapter?

Best regards,
Michael

Hello,

Thank you for your post.

We are looking into this. Please be patient!

Many thanks,
Michael