Search found 382 matches

by picojohn
Thu Jul 24, 2008 1:30 pm
Forum: USB PC Oscilloscopes
Topic: are outer rings of BNC inputs connected on 2203 scope?
Replies: 1
Views: 2213

The BNC grounds are common.

The PS3425 Differential Oscilloscpe may be what you require for differential voltage measurement (http://www.picotech.com/differential-oscilloscopes.html).

John
by picojohn
Thu Jul 24, 2008 1:25 pm
Forum: Pre-Sales Advice
Topic: Flow and temp measurement
Replies: 8
Views: 6998

You may have misread what I wrote: 'PicoLog does not offer pulse counting, however, it would be possible to measure frequency with an appropriate logger ...' Also, the digital I/O addressed your question about the ADC-24 not the ADC-11. The Digital outputs of the ADC-11 may only be used if you write...
by picojohn
Thu Jul 24, 2008 1:15 pm
Forum: USB PC Data Loggers
Topic: ADC-11/10
Replies: 1
Views: 2209

Hi Tom,

The digital outputs require that you write your own software application.

Details may be found in the user manual http://www.picotech.com/document/pdf/adc11-en.pdf and in the SDK http://www.picotech.com/download.html

Regards
John
by picojohn
Thu Jul 24, 2008 12:59 pm
Forum: PicoLog
Topic: ADC 16 Minimized Program Issue
Replies: 1
Views: 1969

Which release of PicoLog are you using and under which operating system?

John
by picojohn
Tue Jul 22, 2008 1:47 pm
Forum: PicoScope 6 for Windows
Topic: Arbitrary waveforms with frequencies below 1Hz
Replies: 3
Views: 3181

Kay,

The PS5203/4 may be set to 0.03 Hz from within PicoScope 6.

Regards
John
by picojohn
Tue Jul 22, 2008 10:07 am
Forum: Pre-Sales Advice
Topic: Sensors for marine aquarium
Replies: 1
Views: 3058

There is just one version of DrDAQ and you may find full details at the following links: http://www.drdaq.com/sensors.html http://www.drdaq.com/index.html You may use 3rd Party sensors and you will find sensor advice in section 2.7 and 2.8 of the user guide http://www.picotech.com/document/pdf/drdaq...
by picojohn
Tue Jul 22, 2008 9:56 am
Forum: Pre-Sales Advice
Topic: Flow and temp measurement
Replies: 8
Views: 6998

The digital I/O may be configured as alarm outputs, and care must be exercised when using those, as they are 3v3 logic based and, appropriate interfacing must be used to drive external devices. PicoLog does not offer pulse counting, however, it would be possible to measure frequency with an appropri...
by picojohn
Tue Jul 22, 2008 9:05 am
Forum: PicoScope 6 for Windows
Topic: Arbitrary waveforms with frequencies below 1Hz
Replies: 3
Views: 3181

Hello Kay,

That is as low as you may go with the PS2203/4/5.

Regards
John
by picojohn
Tue Jul 22, 2008 8:54 am
Forum: General Software Discussions
Topic: Delphi program can not OPEN USB ADC11
Replies: 3
Views: 3619

Hi Jan,

There are two different SDKs for the ADC-11 ... Parallel and USB version.
Which version did you download?

Regards
John
by picojohn
Mon Jul 21, 2008 10:47 am
Forum: Pre-Sales Advice
Topic: Linux drivers for the PicoScope 2104?
Replies: 2
Views: 3154

Hello guest,

64-bit Linux drivers are now available: http://labs.picotech.com/

Regards
John
by picojohn
Fri Jul 18, 2008 1:10 pm
Forum: Pre-Sales Advice
Topic: Flow and temp measurement
Replies: 8
Views: 6998

Hello guest, Our data logging software PicoLog (http://www.picotech.com/data-logging-software.html), and Thermocouple data logger TC-08 (http://www.picotech.com/thermocouple.html) could meet your temperature logging needs. If you obtain a flow sensor which outputs voltage or current in proportion to...
by picojohn
Fri Jul 18, 2008 12:49 pm
Forum: PicoLog
Topic: ADC 16 problem
Replies: 1
Views: 1945

Hello guest,

Did the system previously work OK? If so, has any aspect of the system been changed in any way?

John
by picojohn
Tue Jul 15, 2008 9:56 am
Forum: PicoLog
Topic: Picolog graph vertical scale #2
Replies: 3
Views: 3223

Martin, It has not been possible to view your settings from within PicoLog, however, inspection of the file would indicate that the 'scaling for graphs' setting may be the cause of this behaviour: Please go to 'Settings' > 'Input channels' and select 'Edit' > 'options', after selecting the channel t...
by picojohn
Mon Jul 14, 2008 8:24 am
Forum: USB PC Data Loggers
Topic: Type K Thermcouples compatibility
Replies: 1
Views: 2322

Hello peiqing,

Type-k is an industry standard, therefore, provided the non-Pico thermocouples comply with Type-k, there should not be an issue.

Regards
John
by picojohn
Mon Jul 14, 2008 8:18 am
Forum: Getting Started
Topic: Can ADC-212 work in Picolog Recorder?
Replies: 1
Views: 2455

Hello guest,

Yes, you can use the unit with PicoLog.

Is the version of PicoLog the same as PicoScope?

In any case, try uninstalling PicoLog and install the latest vesion for your operating system: http://www.picotech.com/download.html

Regards
John