Search found 1708 matches

by ziko
Fri Dec 14, 2012 2:21 pm
Forum: Pre-Sales Advice
Topic: Oscilloscope Requirements for My Project
Replies: 3
Views: 3291

Re: Oscilloscope Requirements for My Project

Ok a 15ns pulse means to just see a signal the square wave you would normally be looking at something around 250MHz bandwidth to give you a few harmonics for your fast edges. Since you don't need the fast edges you will need a bandwidth that's perhaps at least 50MHz at least since you are not too bo...
by ziko
Tue Dec 11, 2012 4:51 pm
Forum: Pre-Sales Advice
Topic: Measuring 48 Khz square wave
Replies: 9
Views: 6804

Re: Measuring 48 Khz square wave

Hi I cannot recreate this, you could take a video capture using jing, it records up to 5 mins, you can then upload the file to your account which can then be posted as a link: http://www.techsmith.com/jing.html In terms of products depending on how you are doing your measurements the 3400 series cou...
by ziko
Tue Dec 11, 2012 12:03 pm
Forum: Pre-Sales Advice
Topic: Measuring 48 Khz square wave
Replies: 9
Views: 6804

Re: Measuring 48 Khz square wave

Hi Janne, To measure a signal that has a typical rise time of 3-10ns you need to have a bandwidth that is high enough, the equations goes like this: Bandwidth = 0.35/ Rise time. Therefore Choosing the worst case scenario of 3ns, the bandwidth would have to be at least 117MHz. You would also need to ...
by ziko
Tue Dec 11, 2012 10:55 am
Forum: PicoScope 6 for Windows
Topic: Future request
Replies: 2
Views: 1275

Re: Future request

Thank you for your post, as much as I would like to say we can do this, this is something that is not on our list of things to do. We provide a number of formats, including the mat lab binary format that is widely used. PicoScope 6 is proprietary software, we have our format that is only readable in...
by ziko
Mon Dec 10, 2012 4:35 pm
Forum: PicoScope 6 for Windows
Topic: Serial decoding window localisation
Replies: 1
Views: 1116

Re: Serial decoding window localisation

Thank you for your post I will look into this.


Regards
by ziko
Mon Dec 10, 2012 1:59 pm
Forum: Pre-Sales Advice
Topic: Oscilloscope Requirements for My Project
Replies: 3
Views: 3291

Re: Oscilloscope Requirements for My Project

Using Matlab is not a problem really, you can write your own script or you can save your data in PicoScope 6 as a binary file.

In terms of hardware specification wise, you mention a 4.1ns wide pulse, is this going to be measured or is it just the 15ns pulse?

Kind regards
by ziko
Fri Dec 07, 2012 10:43 am
Forum: Getting Started
Topic: EnviroMon and Windows 7
Replies: 14
Views: 6541

Re: EnviroMon and Windows 7

Hi yeah I did notice you did not have the double quotes and that's what I put on the post. What I put worked on my computer providing I created the folders you include. So it should still work.

Regards
by ziko
Mon Dec 03, 2012 2:56 pm
Forum: Software
Topic: Switch language of Interface
Replies: 5
Views: 5559

Re: Switch language of Interface

Hi no, this is a fix that has only just been made for italian customers only. I was actually going to send you it but they beat me to it!
by ziko
Tue Nov 20, 2012 4:51 pm
Forum: Getting Started
Topic: logger is not running
Replies: 3
Views: 2469

Re: logger is not running

Hi I would try reprogramming the logger, failing that try doing a logload on the device to reset the firmware.

Regards
by ziko
Tue Nov 20, 2012 11:27 am
Forum: Getting Started
Topic: EnviroMon and Windows 7
Replies: 14
Views: 6541

Re: EnviroMon and Windows 7

You will probably find that your files are saved in:

"C:\Users\xxxxx\AppData\Local\VirtualStore\Program Files\Pico Technology\EnviroMon\reports "

where xxxxx is your user log in.

Regards
by ziko
Fri Nov 16, 2012 11:46 am
Forum: Getting Started
Topic: logger is not running
Replies: 3
Views: 2469

Re: logger is not running

Hi what version of the software are you using and how old is your logger?
by ziko
Fri Nov 16, 2012 10:40 am
Forum: PicoLog
Topic: Picolog
Replies: 6
Views: 3575

Re: Picolog

Hi using something like the PicoLog 1000 as I said before you would have to ensure your device is connected to your PC at all times. Providing you configure your settings accordingly logging for a week is achievable. The most reliable way is to use a remote data logger, like the EnviroMon, At the he...
by ziko
Fri Nov 16, 2012 10:09 am
Forum: Getting Started
Topic: EnviroMon and Windows 7
Replies: 14
Views: 6541

Re: EnviroMon and Windows 7

Where have you placed the bat file? Try putting it in your EnviroMon folder if you haven't already.
by ziko
Thu Nov 15, 2012 1:28 pm
Forum: PicoScope 6 for Windows
Topic: Applying a band-pass filter
Replies: 1
Views: 1208

Re: Applying a band-pass filter

We currently do not have any other kind of filtering apart from low pass filtering in our software at the moment.
by ziko
Thu Nov 15, 2012 11:51 am
Forum: Software
Topic: Switch language of Interface
Replies: 5
Views: 5559

Re: Switch language of Interface

Hi thank you for your post.

I will look into this.

Regards