Search found 273 matches

by Glovisol
Mon Dec 26, 2016 8:42 am
Forum: PicoLog
Topic: 2016 CHRISTMAS SPECIAL: SOFTWARE FOR HARD WIRED ALARMS
Replies: 6
Views: 2856

Re: 2016 CHRISTMAS SPECIAL: SOFTWARE FOR HARD WIRED ALARMS

MULTIPLE UNIVERSAL ALARM ACTUATOR SOFTWARE WITH PHYSICAL HARD WIRED OUTPUTS THE SITE PROTECTION SYSTEM HAS GONE COMPLETELY HAYWIRE AND DOES NOT ALLOW POST EDITING ANY MORE AND NOBODY SEEMS TO CARE Please amend final part of previous post as follows: 8. Remember that to start the entire system the "...
by Glovisol
Mon Dec 26, 2016 8:20 am
Forum: PicoLog
Topic: 2016 CHRISTMAS SPECIAL: SOFTWARE FOR HARD WIRED ALARMS
Replies: 6
Views: 2856

Re: 2016 CHRISTMAS SPECIAL: SOFTWARE FOR HARD WIRED ALARMS

MULTIPLE UNIVERSAL ALARM ACTUATOR SOFTWARE WITH PHYSICAL HARD WIRED OUTPUTS The following rules must be followed to implement the build procedure. 1. The click locations must be firmly fixed on the desktop screen. This result can be obtained as follows. - Right click on an empty spot on the desktop...
by Glovisol
Sun Dec 25, 2016 4:18 pm
Forum: PicoLog
Topic: 2016 CHRISTMAS SPECIAL: SOFTWARE FOR HARD WIRED ALARMS
Replies: 6
Views: 2856

Re: 2016 CHRISTMAS SPECIAL: SOFTWARE FOR HARD WIRED ALARMS

MULTIPLE UNIVERSAL ALARM ACTUATOR SOFTWARE WITH PHYSICAL HARD WIRED OUTPUTS Here is the FIGURE 1 which the system did not allow me to upload in the previous post, plus all the text files. Unfortuntely Arduino Files and AMC files have extensions which are not acceptable by the Picotech site, therefo...
by Glovisol
Thu Dec 22, 2016 4:35 pm
Forum: PicoLog
Topic: 2016 CHRISTMAS SPECIAL: SOFTWARE FOR HARD WIRED ALARMS
Replies: 6
Views: 2856

Re: 2016 CHRISTMAS SPECIAL: SOFTWARE FOR HARD WIRED ALARMS

MULTIPLE UNIVERSAL ALARM ACTUATOR SOFTWARE WITH PHYSICAL HARD WIRED OUTPUTS ALMTST layout.JPG The required software for this project is available here: http://www.auto-clicker.com/2011/09/color-change-detector/ https://murgee.com/auto-mouse-click/ Comprehensive instructions are given in the respect...
by Glovisol
Tue Dec 20, 2016 10:36 pm
Forum: PicoLog
Topic: 2016 CHRISTMAS SPECIAL: SOFTWARE FOR HARD WIRED ALARMS
Replies: 6
Views: 2856

Re: 2016 CHRISTMAS SPECIAL: SOFTWARE FOR HARD WIRED ALARMS

MULTIPLE UNIVERSAL ALARM ACTUATOR SOFTWARE WITH PHYSICAL HARD WIRED OUTPUTS ALMSCRN3.jpg SIMPLE STEPS TO GET THE PC DESKTOP READY FOR OPERATION In the previous post we have seen how the Picolog Alarm condition is detected. The PC screen above shows how the PC desktop must look: in a word it must be...
by Glovisol
Mon Dec 19, 2016 4:44 pm
Forum: PicoLog
Topic: 2016 CHRISTMAS SPECIAL: SOFTWARE FOR HARD WIRED ALARMS
Replies: 6
Views: 2856

2016 CHRISTMAS SPECIAL: SOFTWARE FOR HARD WIRED ALARMS

MULTIPLE UNIVERSAL ALARM ACTUATOR SOFTWARE WITH PHYSICAL HARD WIRED OUTPUTS ALMSCRN1.jpg A major limitation of Picotech Data Loggers driven by Picolog is ( A ) the very limited number of hard wired outputs (for instance only 2 on the 1012 and 4 on the DrDAQ, to name a few) and ( B ) the absence of ...
by Glovisol
Mon Dec 19, 2016 4:15 pm
Forum: PicoLog
Topic: DREAM WISH LIST FOR PICOLOG
Replies: 4
Views: 3189

Re: DREAM WISH LIST FOR PICOLOG

MULTIPLE UNIVERSAL ALARM ACTUATOR SOFTWARE WITH PHYSICAL HARD WIRED OUTPUTS It is now possible to take any alarm generated by Picolog on any Picotech hardware type (both direct channel and calculated channel) and drive external devices (relays and/or microprocessors). The number of outputs can be a...
by Glovisol
Fri Dec 16, 2016 8:02 pm
Forum: PicoLog
Topic: DREAM WISH LIST FOR PICOLOG
Replies: 4
Views: 3189

Re: DREAM WISH LIST FOR PICOLOG

Ability to have the digital outputs (if available in the hardware) operated by the alarms of the Math Channels. At present only the input channel alarms operate the digital outputs. Work is being done to obtain independent, physical digital outputs for both physical and calculated parameter channel...
by Glovisol
Mon Dec 12, 2016 2:54 pm
Forum: Applications
Topic: THE MG-811 FOR METERING & RECORDING CO2 WITH THE DrDAQ
Replies: 7
Views: 8534

Re: THE MG-811 FOR METERING & RECORDING CO2 WITH THE DrDAQ

TEMPERATURE BEHAVIOUR AND AGING Air temperature into the sensor slightly influences the sensor's reading. Temperature correction can be applied according to the following table referred to an air temperature of +25°C: AIR TEMPERATURE °C......................CORRECTION -10..............................
by Glovisol
Thu Dec 08, 2016 4:15 pm
Forum: Applications
Topic: THE MG-811 FOR METERING & RECORDING CO2 WITH THE DrDAQ
Replies: 7
Views: 8534

Re: THE MG-811 FOR METERING & RECORDING CO2 WITH THE DrDAQ

ADDITIONAL TECHNICAL INFORMATION SPECIFICATIONS Two CO2 detectors based on the solid electrolyte technology are presently available: the MG-811 used for this series and the MG-812 which uses half the heating power. Specifications for both are given below. Note that the +12V input (Switching Regulat...
by Glovisol
Thu Dec 08, 2016 1:10 pm
Forum: Sensors
Topic: Sensor Co2 in air for Dr.DAQ
Replies: 1
Views: 3642

Re: Sensor Co2 in air for Dr.DAQ

Sorry for the delay!

Yes, there is a complete CO2 measuring setup now, look at:

topic27251.html

Cheers,

Glovisol
by Glovisol
Thu Dec 08, 2016 12:59 pm
Forum: Applications
Topic: THE MG-811 FOR METERING & RECORDING CO2 WITH THE DrDAQ
Replies: 7
Views: 8534

Re: THE MG-811 FOR METERING & RECORDING CO2 WITH THE DrDAQ

CO2 SENSOR OPERATION

Typical operation in outside open air, where typical CO2 concentration is 400 PPm +/- 10 PPM is illustrated in FIGURE 1. Sensor operation is quite stable.

A few recorded CO2 variations are shown in FIGURE 2.
by Glovisol
Wed Dec 07, 2016 3:27 pm
Forum: Applications
Topic: THE MG-811 FOR METERING & RECORDING CO2 WITH THE DrDAQ
Replies: 7
Views: 8534

Re: THE MG-811 FOR METERING & RECORDING CO2 WITH THE DrDAQ

DrDAQ APPLICATION CO2 - SETUP SCREEN.jpg 1. Bill of materials - Picotech DrDAQ. - MG-811 CO2 Module complete with MG-811 sensor plugged in. - MG-811 CO2 Module connector cable. - AC/DC PSU: 12 V @ 0.2 A. - 1000 c.c. Standard gas bottle @ CO2 0.1%. Do not be frightened, bottles are currently availab...
by Glovisol
Wed Dec 07, 2016 10:28 am
Forum: Applications
Topic: THE MG-811 FOR METERING & RECORDING CO2 WITH THE DrDAQ
Replies: 7
Views: 8534

Re: THE MG-811 FOR METERING & RECORDING CO2 WITH THE DrDAQ

SENSOR SIGNAL CONDITIONING & OTHER HARDWARE With reference to the MG-811 module schematic diagram, high input impedance / low drift U2A accepts the 1 GOhm output of U1 and amplifies the cell output voltage Vc by a factor of 8.5. With a cell output of 600 mV, the module output would be in excess of ...
by Glovisol
Tue Dec 06, 2016 3:51 pm
Forum: Applications
Topic: THE MG-811 FOR METERING & RECORDING CO2 WITH THE DrDAQ
Replies: 7
Views: 8534

Re: THE MG-811 FOR METERING & RECORDING CO2 WITH THE DrDAQ

SENSOR THEORY AND THE EXCEL CALCULATOR (3)

Here is the MG-811 EXCEL CALCULATOR