Search found 598 matches

by markspencer
Tue Nov 02, 2004 10:14 am
Forum: Pre-Sales Advice
Topic: Linux: USB 2 SERIAL
Replies: 1
Views: 4792

Hi, Thank you for your question. Unfortuanately, the USB to serial port adapter does not list Linux as one of the operating systems that it works on. If you could find a USB to serial port adapter that does work on Linux I am still unable to say that the TC-08 would work on via this set up, as it ha...
by markspencer
Tue Nov 02, 2004 9:59 am
Forum: Hardware
Topic: Averaging function in EnviroMon
Replies: 1
Views: 5008

Hi,

Thank you for your post the averaage is the reading for each minute added together and then divided by the number of minutes, there does not seem to be any rounding taking place when the divide is done.

Best regards,
by markspencer
Tue Nov 02, 2004 9:37 am
Forum: Getting Started
Topic: PicoScope do not recognize Pico-ADC200
Replies: 1
Views: 4758

Hi, I am sorry to hear you are experiencing this problem. Although you state that you are using the latest Picoscope software I would like you to go to help | about and check that it says. Release 5.11.6 - 32 bit ADC200.sys V6.0 If not download it from our website, install the software and reboot yo...
by markspencer
Tue Nov 02, 2004 9:05 am
Forum: Pre-Sales Advice
Topic: Photodetector?
Replies: 1
Views: 4558

Hi, Thank you for your question. The ADC-10 would be suitable for data collkection at a rate of 1 per second. However, there are other factors that need to be taken into account. 1. How many channels do you need. If one channel is fine then again the ADC-10 would be suitable, otherwise an alternativ...
by markspencer
Tue Nov 02, 2004 8:49 am
Forum: PicoLog
Topic: ADC11 etc. digital output
Replies: 1
Views: 3662

Hi, I am sorry to hear that you are experiencing this problem. Unfortunately, the only solution is the one you stated. Unless someone else on the forum has done it and willing to share there code. I will put your suggestion to the developement team, but this does not mean it will be implemented. Bes...
by markspencer
Tue Nov 02, 2004 8:45 am
Forum: Pre-Sales Advice
Topic: DC power cable diameter and fuse calculation
Replies: 3
Views: 10948

Hi,

Unfortuantely, I an unable to assist with this enquiry. However, perhaps someone else on the forum can provide the information.

Best regards,
by markspencer
Tue Nov 02, 2004 8:21 am
Forum:
Topic: adc212 signal generator
Replies: 7
Views: 8878

Hi, Thank you for your information I have tested the latest version r5.11.6 with the different ADC-212 unit models available and did not find any problems. The frequency I specified in the signal generator dialog box was the frequency output by the unit. The latest version available from our website...
by markspencer
Wed Oct 27, 2004 8:38 am
Forum:
Topic: ADC 11 and Labview 7.1 on XP
Replies: 12
Views: 15357

Hi,

I have been speaking to the development team and looking at the adc11_labview_single. This routine uses the same adc11_open_unit function that you are trying in your own application. If you tell me the values being passed I will try to assist you further.

Best regards,
by markspencer
Wed Oct 27, 2004 8:28 am
Forum: Pre-Sales Advice
Topic: tc08 with laptop, how to connect to a ground point...
Replies: 1
Views: 4807

Hi,

Thank you for your question. Unfortuantely, you al ready have the solution that we suggest and you have discounted it. You need to find some way of either grounding the TC-08 or the Laptop.

Best regards,
by markspencer
Wed Oct 27, 2004 8:18 am
Forum:
Topic: Labview VIs that include USB port options
Replies: 2
Views: 5622

Hi, Thank you for your question. The routine that is used to open the ADC-212 whether it is connected to the parallel port or the USB to Parallel port adapter is the same adc200_open_unit routine. The only difference is that on the parallel port the arguments passed are: 1 - LPT 1 2 - LPT 2 3 - LPT ...
by markspencer
Wed Oct 27, 2004 8:12 am
Forum: Pre-Sales Advice
Topic: pico as a SPI bus logic analyser?
Replies: 2
Views: 5671

Hi, Thank you for your request. The unit that I would recommend to seen the signals would be a ADC-212/3. Unfortunately, I do not believe that it will do all that you want. The signals can be seem on the scope view, but no interpretation can be made by the software as to what the character on of the...
by markspencer
Wed Oct 27, 2004 7:53 am
Forum:
Topic: ADC-212-100
Replies: 1
Views: 4086

Hi, When it says waiting for adc it means that the unit has not been opened. When starting the software up do you get any other message such as ADC212-100 not found or Error 2, Error 5. Which are all communication problems. When the Power lead is first plugged into the ADC-212/100 does the LED light...
by markspencer
Wed Oct 27, 2004 7:38 am
Forum:
Topic: ADC 11 and Labview 7.1 on XP
Replies: 12
Views: 15357

Hi, I am sorry to hear that you are still experiencing problems, unfortunately I do not know what you mean by labview assess routines work. Please could you explain stating the functions being used and what it does. Have you tested the ADC-11 with Picoscope does it work in this application. If not c...
by markspencer
Wed Oct 27, 2004 7:21 am
Forum:
Topic: ADC200/20 LabVIEW
Replies: 3
Views: 5632

Hi,

Unfortunately, the routines that are explained in the help manual are the only ones that can be used. You could look at the set_rapid routine to speed you you arming and collection of the values.

Best regards,
by markspencer
Wed Oct 27, 2004 7:17 am
Forum: PicoLog
Topic: TC08 monitoring on laptop
Replies: 7
Views: 8817

Hi, To connect the TC-08 to a known and tested earth you will need a earth tester to check the mains earth is good. Connect a piece of cable to the outer shell of the 9 D connecter, this can be done on the screw terminal part. Then connect the other end to your known and tested ground point. Best re...