Search found 109 matches

by matthew
Tue Apr 22, 2003 10:45 am
Forum: General Software Discussions
Topic: Error Spawning c1.exe
Replies: 2
Views: 7706

Hi, Although the files should be compiler independent, this may not always be the case. The programs were written in Borland, so if you want to compile them in other compilers, you may need to make some minor alterations. These will probably be compiler dependent, so you will need to play around wit...
by matthew
Tue Apr 22, 2003 10:28 am
Forum: General Software Discussions
Topic: ADC1032.xls
Replies: 3
Views: 6635

Nearly always the directory you are double clicking the Excel file from.

Regards,
by matthew
Thu Apr 17, 2003 9:35 am
Forum: General Software Discussions
Topic: ADC1032.xls with USB Adapter
Replies: 4
Views: 8789

Hi again, It appears that this has already been fixed last year, try downloading the latest software again (download buttom at the bottom of this page). When you reinstall make sure you overwrite the previous installation. The file you are interested in, is adc1032.dll . Place this file into the sam...
by matthew
Wed Apr 16, 2003 9:42 am
Forum: General Software Discussions
Topic: ADC1032.xls with USB Adapter
Replies: 4
Views: 8789

Thanks for the information,

We do know about this problem and are trying to resolve it by the next software web release (after 5.09.4), as you suggest, it only affects the USB operation, so using the LPT1 port is a temporary solution.

Best Regards,
by matthew
Wed Apr 16, 2003 9:36 am
Forum: Pre-Sales Advice
Topic: ADC-216 for Real Time Control
Replies: 1
Views: 6008

Hi, Unfortunately most of our oscilloscope systems are not true real-time (they use buffering), so they will not be suitable for a control system. The ADC-100 does not use buffering so it is as real-time as possible with a PC, however, since it runs through Windows, the pre-emptive multitasking can ...
by matthew
Mon Apr 14, 2003 9:36 am
Forum: General Software Discussions
Topic: ADC1032.xls
Replies: 3
Views: 6635

Hi,

If you've installed PicoLog, then the dll file will be in the installation directory. Just copy the dll into the xls file's working directory.

Best Regards,
by matthew
Mon Apr 14, 2003 8:34 am
Forum: Pre-Sales Advice
Topic: Vibration FFT from accelerometer
Replies: 3
Views: 12996

Yes,

The free PicoScope software does incorporate an FFT averaging mode from Settings|Options|Advanced.

Best Regards,
by matthew
Thu Apr 10, 2003 10:33 am
Forum: PicoLog
Topic: HOW CAN I RUN 2 TC-08'S ON ONE PC?
Replies: 1
Views: 3689

Hi,

Simply enable multiple converters from Settings|Recording then use Settings|Input channels to add more TC-08s (the help file details this.

Best Regards,
by matthew
Thu Apr 10, 2003 10:01 am
Forum: General Software Discussions
Topic: Compatible Linux Versions?
Replies: 6
Views: 8556

Hi Walt, Although, I can get the application to compile on linux kernel 2.4 (I think its Redhat 6). I can't get the ADC-100 to take any readings. Since we're not in a position to support the Linux drivers in a timely fashion (see the notice on the linux download page ), I would advise against persui...
by matthew
Thu Apr 10, 2003 9:18 am
Forum: Pre-Sales Advice
Topic: Vibration FFT from accelerometer
Replies: 3
Views: 12996

Hi, The ADC-212/3 should be fine for this if the 12-bit resolution is sufficient. A better unit would be the ADC-216 , this has a more accurate clock, and 16-bit resolution. All of our scopes are two channel, so you won't be able to measure 3 sensors simultaneously ... I can't offer any advice on th...
by matthew
Tue Apr 08, 2003 2:01 pm
Forum: Pre-Sales Advice
Topic: Multi channel loging
Replies: 1
Views: 5877

Hi Malcolm, The following would be a viable solution for this application: 4 x TC-08 (8 channel thermocouple converters) 1 x ADC-11/12 (11 channel 0-2.5V converter) The laptop will most likely have a parallel port connector for the ADC-11, however, it will not have enough serial ports for the TC-08s...
by matthew
Tue Apr 08, 2003 12:21 pm
Forum: Pre-Sales Advice
Topic: Accurate measurements at low frequency
Replies: 4
Views: 8967

Hi Carlos, Although PicoLog won't go much lower than ~7-8Hz, PicoScope can measure very low frequencies (<1Hz) using the Settings|Measurements function (this displays a number on the bottom of the scope trace indicating the fundamental frequency). The ADC-42 should be capable of doing this, however,...
by matthew
Fri Apr 04, 2003 8:46 am
Forum: PicoLog
Topic: Logging selected time-slices
Replies: 1
Views: 3801

Hi Ken, Unfortunately, this is not something that PicoLog can do ... I like the idea though. I'm going to put this on as a wish list item for a future software version. My initial thoughts on solving this in the short term are either to: collect all of the data but then eliminate the non-useful data...
by matthew
Fri Apr 04, 2003 8:35 am
Forum: PicoLog
Topic: External trigger for TC-08 & ADC11 in use together
Replies: 1
Views: 3974

Hi Andy,

No, unfortunately PicoLog wasn't desiged to do this. The only way you could implement this is to write your own software.

The software examples can be downloaded by following the links from here.

Best Regards,
by matthew
Fri Apr 04, 2003 8:17 am
Forum: Pre-Sales Advice
Topic: ADC-212/100
Replies: 3
Views: 10193

Hi,

The current price of the ADC-216 is £499GBP excluding tax and delivery.

Best Regards,