Search found 656 matches

by Michael
Thu Sep 01, 2005 1:33 pm
Forum: General Software Discussions
Topic: USB Port ID for Excel Use
Replies: 6
Views: 9155

Hello,

Thank you for your post.

If you are using Pico drivers, you should not need the USB port ID when requesting data.
If you are having difficulty with using our drivers, please don't hesitate to contact us direct at tech@picotech.com


Best regards,
Michael
by Michael
Thu Sep 01, 2005 11:23 am
Forum: General Software Discussions
Topic: humidiprobe
Replies: 1
Views: 3112

Hello Sam, Thank you for your post. You can add a calulated parameter to PicoLog to calculate dew point temperature. You can then add this to the graph view. In the graph view, select graph options and plot all lines on one graph. Please don't hesitate to contact us if you have any further questions...
by Michael
Thu Sep 01, 2005 10:42 am
Forum: PicoLog
Topic: USB TC08 XP long run times and display problems
Replies: 1
Views: 3348

Hello, Thank you for your post. In order to help you further, please send the following information to us at: tech@picotech.com The version of PicoLog you are using (See PicoLog, Help, About in the menu Bar) A copy of the PicoLog setup file you are using. This will help us to identify any problems y...
by Michael
Thu Sep 01, 2005 10:32 am
Forum: PicoScope 5
Topic: Moving from ADC-212 to PS-3423
Replies: 1
Views: 2793

Hello, Thank you for your enquiry. Does the problem occur when using the ignition pick up or the current clamp? If so, it sounds like you have mapped the scope settings but not the custom ranges. Try adding the custom ranges as indicated in the following online articles: http://www.picotech.com/auto...
by Michael
Thu Sep 01, 2005 10:26 am
Forum: PicoScope 5
Topic: Algebraic add
Replies: 1
Views: 2957

Hello, Thank you for your reply. You cannot perform calculations on channel inputs within PicoScope. PicoLog, our data logging software, is equiped with a calculated parameter function. You can download this free from our website. Please visit www.picotech.com/download.html Best regards, Michael - T...
by Michael
Thu Sep 01, 2005 10:19 am
Forum: PicoScope 5
Topic: Triggering, noise rejection questions
Replies: 4
Views: 4981

Hello Mark, Thank you for your post. You would need to condition the signal for noise before the scope. The trigger function is basic and stability can be subject to noise particularly at higher frequencies. You would need to play with the trigger advance/delay to get the most out of the scope buffe...
by Michael
Thu Sep 01, 2005 10:02 am
Forum: PicoScope 5
Topic: Custom ranges
Replies: 2
Views: 3449

Hello, Thank you for your posting. You can add custom ranges in PicoScope quite easily using the custom range manager. This is located in the Settings menu in the Scope screen. This will allow you to scale an input to reflect a minimum and a maximum scale. You can also use the channel zoom function ...
by Michael
Thu Sep 01, 2005 9:48 am
Forum: Getting Started
Topic: SLA-16 Logic Analyser
Replies: 3
Views: 6430

Hello,

Thank you both for your enquiry.

You can obtain further information by sending an email to:

tech@picotech.com

Please include your name and address and we can send you the software.

Best regards,
Michael - Tech Support
by Michael
Mon Aug 22, 2005 10:42 am
Forum: Getting Started
Topic: ADC-12 drivers and Windows XP
Replies: 1
Views: 5018

Hello Thank you fpr your post. I have inserted your module text into MS Excel for analysis but did not have the same results as you have indicated. I am running XP pro with Excel 2002. Have you tried the drivers from our manuals and drivers section? I downloaded this file and added your GetAdc10 sub...
by Michael
Tue Aug 16, 2005 11:27 am
Forum: General Software Discussions
Topic: How to acquire the 5GS/s sampling rate on a ADC 212-100?
Replies: 1
Views: 3102

Hello, Thank you for your post. In order to get the high sampling rates, you will need to engage the Equivalent Time Sampling(ETS) modes. You can do this by using the adc200_set_ets command. Further information can be found in the help files, search for ETS. Please don't hesitate to contact us if yo...
by Michael
Tue Aug 16, 2005 11:13 am
Forum:
Topic: sample rate
Replies: 1
Views: 3665

Hello Will, Thank you for your post. Sorry to hear of your difficulty. We have been unable to replicate this problem with the latest version of PicoScope. Can you clarify the settings and symptoms you are experiencing? Can you send any images or settings files to tech@picotech.com ? Is the software ...