ASD5020-ArcticSiliconDevices ,or: hmcad1520

Now understanding.

Thanks.

The "window" trigger did not work in the "scope mode" mode (it did not capture the "AC" signal simultaneously on two fronts), but in the "Persistence Mode" it worked fine. And not only sine wave, but also other signal forms: am, fm, triangle and others..., and in different ranges: from a few hertz t...

Hi.

Hi. Here is the result-Video file: https://yadi.sk/i/rEedQklZSxJaGw In the "Persistence Mode" mode the "window" trigger can capture the image waveforms, but in the "Scope Mode" this is not possible (with signal different waveforms and speeds). Very,very good device, small and handy. Might be able to...

Hello. Sometimes there was a need to view the waveform in "Scope Mode" with a trigger "window", but the periodic appearance and disappearance of the signal created the inconvenience of viewing (in "Persistence Mode" it is convenient to view). Question: can is it possible to make such a function or t...

If the reason is different, you can try to reprogram the oscilloscope - if you can't fix the cause, then the problem is in the hardware.

Video:
https://yadi.sk/i/DINUiFhdAZalOw

Did you use the switch on the probe x1 - x10, and in the program picoscope 6 is in the settings for each channel?

Can you post a video?
And what CPU did you use?

Hi. In the range from 45 to 50 MHz, the waveform display changes when the second channel is turned on and off.
This is fine? Or maybe need to update the firmware for the device?
Thank.

https://yadi.sk/i/VZrOGrZnCoXT-Q

Thank.

Hi Gerry.

Here is the video file.
You can download the file here:
picoscope-2206B.mp4
https://yadi.sk/i/GZEIq7mMvlRcqg
The problem is not with the computer.
Again delay.
Please look, Is this the way it should be?
Or can you re-install the program online inside this Picoscope 2206B model?

Thanks.

Sorry . Reason: Slow CPU in my computer.

Sorry . Reason: Slow CPU in my computer.