That would indeed be a nice feature.

I think you have a button called "Zero offset" in the channel settings, have you tried that?

I do see your points. The situation isn't quite ideal.
About the short input box, I believe you can write the formula anywhere and copy-paste it (or copy-paste it from the box to anywhere else with more room), if that helps seeing everything going on at once.

I don't use picolog, just the picoscope software so there may be differences in how this works, but I fail to see the point in using the output from one or more math channels to base another math channel on. Make one single math channel to do all the math you want based on the raw input data, and yo...

You may need to elaborate on how you mean.

Hi, I'm researcher. i have piezoelectric generator devices with signal Vpp 44, 60, 50, 100 and 150 Ac voltage with open circuit current 4.4 uA and 6uA 5.5uA and 9uA, respectively. can i use the 2205A picoscope to get the signal or not ? and which mode safety for the picoscope to get the piezoelectr...

It is an oscilloscope, and as such it can perform any common oscilloscope duty. It will measure voltage over time, it doesn't care if you've hooked it to an audio amplifier, a computers power supply or a couple of sensors in a car - it will measure whatever it's hooked up to and show you the result ...

I think you had to make a choice about what you are saving first. Something along those lines.

I would try uninstalling the software and installing it again. Tends to solve many strange issues after updates.

Can't you just connect another regular scope channel to the same input signal (at a voltage lever that can handle of course) and check for any difference between the channels? Would tell you what you really get, not just a theoretical estimate.

Okay, at least what's going on is making sense then! I hope that will be fixed in the future, but I get that the obsolete models aren't the priority. I'll just stick with Pico 6 when i need maximum samples in multiple waveforms for now, and go with Pico 7 to learn that when less samples/waveforms wi...

No, that's not what I'm seeing unfortunately, I get the max number of waveforms that totals 2MS together. At 500kS I get 4 waveforms maximum as in the picture, at 2MS I get one single waveform, at 100kS I get max 20 waveforms. In Pico 6 it works as you describe. I know the 2003 is old and obsolete, ...

I'm back again. But now I think see what's going on. When I use streaming mode in Pico 6 I can use max 2MS per channel (max for my scope model, so that's as it should be), but I get those 2MS in every waveform. If I'm saving 32 waveforms I can have 32 waveforms at 2MS each. In Pico 7 progressive mod...

Can you disable the trigger and repeat the test. Well, that was interesting! I started Pico 7, changed time to 200ms/div to go to streaming mode, the problem was there. Went to trigger and disabled it, the problem went away. Reactivated the trigger, tried different trigger settings, restarted Pico ...

Some more tests shows that it works if I unplug the USB before going to sleep mode, and plug it back in after waking it up. Not ideal, but it does the job good enough for occasional "off grid" work.