Hello there, I am using Windows 10 with the latest PicoScope application and the PicoScope 3000 series device. So far I was working in such hardware setup and everything worked well: no_iso.png I have acquired a Alldaq...

Hello there, I have used Picoscope 6 to capture and save the following UART data to a psdata file (attached). I was wondering whether it is possible to save it in a format that would allow to easy examine this log, i.e. a CSV file in which each line would indicate the time stamp and the consequent b...

I have tried what you suggested before- all channels had the same problem. Interesting thing is that when I have opened PicoLog 6 now, the voltage was read correctly again (see attachment). I have experienced this before. So now when I logged the voltage, it was indeed visible (see attachment, apart...

Hi, Thank you for the answer. Yes, you cannot see anything because Picolog sees no voltage (see attachment). I have deleted all of the files from the dir you have mentioned. Redid the measurements. Now the values are visible, but they are measured in few uV-mV instead of close to the actual battery ...

Hello there, Please find the package with the following inside: picoscope_6_buffer.psdata - buffer from the PicoScope 6 software, picolog_6_config.picolog - Picolog 6 config picolog_6_data.picolog - Picolog 6 recording for 1 minute. bat.jpg - battery picture with multimeter reading. Thank you for th...

Hi Martyn, I have been in contact with the support for a longer while. I still experience both of the problems with PicoLog 6 and the support does not seem to be able to provide any relevant feedback. What does not work in Picolog 6: 1. The voltage measured by the scope is always bellow few mV (it d...

Hi Martyn,
Thank you for the answers!

Hello there,
What is the preset measurement resolution in PicoLog software? Is there also a way to specify a specific one for the given channel (could not find this option)?

I would appreciate all feedback.

Martyn, Thank you for your answer- indeed that was the case, I missed that! So now I tried to perform a test log again. I noticed the following issues: 1. Even if I pause the logging, the process goes on until the end of specified by me interval (i.e. 1 minute I found to be the minimum option). 2. I...

Hi there, The reset button only resets the data. I have tried it. The channel voltage was there bo matter whether the measurement was ongoing or not. The channel was configured like this: 20v p-p Ac coupling 1:1 probe 20 ms period sample rate But it does not really matter ehat I set there. I see the...

Hello there, For few days I am testing the Pico 3406D MSO scope with Picolog 6 software. I am having a lot of trouble using this SW (While Picoscope 6 works correctly). Here are the problems I experienced: Day 1: everything seems to be working correctly- I could log the data and view graphs in Picol...