YES! Been asking for this since the first Beta was released. Put in the feature request a long time ago. Seems like a pretty easy and important feature to implement, but have kinda given up hope at this point that we will ever see it implemented...

-DD

It does appear that this is resolved with the new Beta software. Had a bit of trouble testing due to problems with loading an older version of a scope setup for testing. The Beta sw kept crashing when updating measurements. When I recreated the measurements from scratch, this seemed to be working no...

I am excited to see that this major issue might be finally resolved in the latest Beta software. I will have to test and see.

-DD

The PicoScope software should measure the voltage of a channel at each Vertical Ruler location, at the time that the Ruler is set to. This should appear in the Time and Frequency Ruler Legend along with the time or frequency. This should be a real-time measurement on a buffer-by-buffer basis. Additi...

Thanks for the confirmation. It is definitely more involved than just the 10x problem and seems to be something wrong with accessing the memory buffers for calculations. Maybe something as simple as a memory indexing problem with the software. Regardless, this seems like it should be higher on the l...

This applies to all Beta Versions.
CurrentVersion Tested: 7.0.112.13028

.PSDATA file attached

I love the flexibility of the math channels but trying to get a consistent measurement from them is almost useless. There must be some major memory buffer issue that Pico needs to solve to get proper measurements. I have a circuit where I measure the power by connecting Channels A and B to a 1 Ohm r...

It looks like at this point your only option is to hit "Alt-Print Scrn" to save the whole PicoScope window. But I would still use the "Send Feedback" button in PicoScope Beta app and make a suggestion to save the window and measurements.
-D

I now see the big "Reset" button housed in the measurement pane on the bottom right! Doh!
-D

I played with the Digital channels, and now I see what you are saying. For the Analog channels the name only shows up on the Channel button and not actually in the Waveform window like the Digital channels have. It would be nice for it to show there too, so that when you use the save button to save ...

Agree. I just suggested in the feedback to allow resetting the statistics. They could add this to the left-click popup window on an individual measurement. With your suggestions, it might make sense to add another option to specify how many measurements to use for the statistics, or use infinity wit...

Seems like it is there. Click on the Channel. Then select the Display tab. Update the "Name".

-D

Is there ANY chance that Pico will add functionality like this? It seems like Pico is not adding features, just support for new scopes. I looked at the new Beta ver 7 and this is not available there either...

Called and talked with Tech Support. They said this is normal. I guess being a 30A clamp, reading 50mA is in the noise floor.

It seems that my TA189 30A Current clamp is very noisy. It is so noisy that it is basically unusable at the +/-100mA setting. The measured peak to peak noise is 248.1mA, and the measured True RMS is 11.06mA with nothing in the clamp. This is after zeroing. The Channel is set to 30A Current Clamp, 20...