Hello, The threshold can be set from -32512 (-1V) to 32512 (1V). Since I had tested the external CLK setting only with a 5 MHz signal, I was wrong in my previous post. In fact : If I connect a 5 MHz signal to the aux input the result is : frequency=0 => pico runs with its internal clock frequency=1 ...

Hello, I have to handle 2 PS6403 synchonised with an external clock connected to the aux input. I find no example that describes the use of the PS6000SetExternalClock function. I have created a VI using the call library function node (not inculed in the labview.llb), but I get the error message : PI...

PS6403
SN AY432/020

Hello, Thanks for your reply. It seems that I can read continuously (for several minutes) the 4 channels at a 1MHz sampling rate and when I turn this rate to 2 MHz data are lost after a “short” time (20 to 30 seconds). In fact my requirement is to increase the sampling rate up to 10 MHz and to read ...

Hello, I use a ps6000 oscilloscope in streaming mode and I can check from time to time that some data are missing. I know this is unavoidable but I wonder if the flag PS6000_LOST_DATA has been implemented or not. On one end I never see the code -32768 in the data flow (even when data are clearly mis...