Hi, I'm having problems with data returned from a TC-08 logger to several laptops, in which the voltage displayed in Picolog is between 2.5 and 3 times lower than it should be. This also applies when using the TC-08 terminal board - voltages are less than expected, even with the 101x reduction from ...

Ignore this, I have found my solution.

Turns out the transducers I inherited were ratiometric, so all I needed to do was reduce the input voltage to 7 V!

Hi all, Having trouble getting a 100 mV (max) signal into a TC-08 using a thermocouple connection, the problem is there's no common signal - my signal is floating but with a 0-100 mV range. I tried to use a voltage divider between the + and - terminals to bring the + down but it has completely chang...

What if all the grounds are the same? Could I use a single ground for all inputs? What if the grounds are different for some channels? Can the ADC 1216 handle this?

Can't seen to find this info in the user guides?

Cheers,
Phil

Hi, I'm fairly new to Picolog and have run into a little problem. I am trying to set up multiple instances of Picolog Recorder in version 5 using the instructions in section 3.13 of the user manual. I have successfully done that with five TC-08's and created the batch file to open the individual set...