Yesterday I have inquired from PicoTech support, whether they have found a solution to the problem and whether they will provide an updated and corrected version of PicoScope 6. The answer is: "No we are no longer supporting Windows 7 as its no longer receiving windows updates. And not supported by ...

No, I have only changed the PicoScope6 version. v6.14.54 does not find the 2204A, v6.13.17 finds it. I have changed back and forth. FRA4PicoScope with the latest PicoSDK also finds the 2204A. In the meantime I have directly written to PicoTech's support. Last Friday somebody answered and asked for a...

Thank you Aaron for the detailed answer. I am looking forward to your next version of FRA4PicoScope :-) : @setti: The possible problem depends on the length of cables that you are going to use and the kind of termination at the other end. E.g. RG58 coax cable is specified with 105 pF/m. If you attac...

As nobody replies to my problem report I have looked for other peoples experiences with the 2204A and PicoScope6 and ...7. This led me to this youtube-video: https://www.youtube.com/watch?v=PVtSvYQLSOo The author tells that PicoScope6_r6_14_54.exe is the last version and that PicoScope6 will no long...

Hello Aaron, my impression is that FRA4PicoScope applies "Minimum cycles captured" already while Auto-ranging to find the most appropriate sensitivity for input and output. This takes a long time for frequencies <1Hz. Is my impression correct ? If yes, my feature request for your next version would ...

Hello Aaron, thank for the explanations and hints. I have made two further test measurements, 1. one with my previous settings, i.e. "low noise mode", "Minimum cycles captured": 28, and default values. Stimulus 4Vpp, sweep from 0.1 to 3000 Hz. This took 34 minutes, spending most of the time for 0.1 ...

Hello Aaron, I have looked for the 10.7.20.192 version of the SDK and found that its only insignificantly smaller (111.7 MB) than the current version ...21.227 (112.5 MB filesize shown under Linux). Then I tested this: De-installed FRA4...0.7.0b installed FRA4...0.7.3b Started FRA4... with PicoSDK_3...

Hello Aaron, thank you for the detailed explanation. I have not yet read every word, but tried to grasp the main "scene". 1. So I understand, version 0.7.0b was not yet ok with respect to lowest possible frequency. 2. Version 0.7.3b crashed at every attempt to start. In any instance, however, I had ...

"With a little help from my friends" I managed to find a copy of PicoSDK_32_10.6.13.97.exe, overcame my aversion against software, most of which I will never use, and installed it. The ~75 MB download was expanded to ~164 MB. The positive side is that FRA4PicoScope 0.7.0b now starts quietly without ...

Accidentally I hit on the Yes-button after FRA4PicoScope's initial message "Loaded DLLs do not meet... Continue?". Version 0.7.0b starts, finds the 2204A and successfully initializes it. Minimum frequency with the default settings is now 0.77 Hz. (I think, also with 400 ms "Extra settling time"). Wh...

I have now de-installed PicoScope6_r6_14_54 as it is useless. Instead I have installed Version r6_13_17 which manages to find the 2204A. FRA4PicoScope0.6.2bRC4 works in that connection. Nevertheless I have also de-installed FRA4PicoScope0.6.2bRC4 and replaced it by FRA4PicoScope_0.7.0b. This version...

No, I always tried only one or the other application. In the meantime I have returned to FRA4PicoScope 0.6.2b RC4 because this is the only one of the three versions mentioned, that works in my environment, i.e. Windows 7 64 Bit Home Premium. I have posted the problem in another forum and heard from ...

Hello, I purchased a 2204A in 2018 and have been using it with PicoScope6_r6_13_15.exe until an hour ago. Then I installed the new version PicoScope6_r6_14_54.exe . This version does not find the connected device. When I unplug and plug in again the program starts in demo-mode. The menu item File->C...

In the meantime I have installed the newest version of PicoScope 6 and it got even worse: PicoScope6_r6_14_54.exe does not recognize my plugged-in PicoScope 2204A. It starts in demo mode. I cannot connect any device because the device list is empty. What kind of shit is this ? That's horrible... Kai

I have tried two more things: 1. Installation of version FRA4PicoScope%200.6.2b.msi of 22.06.2019 -> Complains about to old DLLs in PicoScope6. I am still using PicoScope 6.13.15.4081 2. Installation of FRA4PicoScope0.6.2bRC4.msi of 06.02.2019 -> works I have not looked after new versions of PicoSco...