Search found 5 matches

by naltieri
Fri Mar 29, 2019 2:55 pm
Forum: Pre-Sales Advice
Topic: using picoscope to capture data without usb connection but maintaining its power connectivity
Replies: 4
Views: 563

Re: using picoscope to capture data without usb connection but maintaining its power connectivity

You could use with a small rugged fanless PC like a NUC or simillar. Have done this and powered the scope from battery, you can put the PC to sleep to save power and leave for up to a week, or schedule it to wake up at a certain time, or via sending a wake up on LAN command to bring it out of sleep ...
by naltieri
Thu Mar 28, 2019 4:11 pm
Forum: Getting Started
Topic: Capture time only shows 1 second resolution
Replies: 2
Views: 382

Capture time only shows 1 second resolution

In picoscope 6 the waveform properties show the Capture Time i.e. the date and time a waveform was triggered by the scope. The reported Capture time only shows a resolution of 1 second, is there a way to obtain the capture time down to millisecond resolution.

Thanks
by naltieri
Tue Feb 12, 2019 11:26 am
Forum: PicoScope 6 for Windows
Topic: Rapid capture mode problem
Replies: 2
Views: 926

Re: Rapid capture mode problem

Thanks for the reply Martyn, but is there anything that can be done to speed up the fix with rapid capture as we first reported this issue about 2 years ago.
by naltieri
Mon Jan 28, 2019 3:39 pm
Forum: RF Products
Topic: Transistor measurements
Replies: 2
Views: 1580

Re: Transistor measurements

Have done something similar in the past but used an external bias Tee, this provides the DC isolation but allows you to pass the VNA signal through to the device. Connecting the bias Tee to a power supply allows one to adjust the supplied voltage. If your looking to assess for junction capacitance y...
by naltieri
Mon Jan 28, 2019 1:51 pm
Forum: PicoScope 6 for Windows
Topic: Rapid capture mode problem
Replies: 2
Views: 926

Rapid capture mode problem

A problem using Picoscope 6 in rapid capture mode, if one sets the number of segments to be captured to be for example 100, but in reality only 99 segments occur then Picoscope 6 will wait for the 100th segment, in many real life one off situations this is a regular occurrence so if using a scope on...