Search found 6 matches

by nickk622
Tue May 20, 2014 10:27 am
Forum: PicoScope 6 for Windows
Topic: jitter on signal from maths channel
Replies: 1
Views: 2917

jitter on signal from maths channel

Squire wave signals both 1khz and 50% duty cycle, signal high level of 18.12v and signal low of 633mv and a phase shift of 90 degrees with channel2 leading are feed to channel1 and channel2 of a PiccoScope 2204A with windows program version 6.8.11.20. So both channels can be monitored for missing pu...
by nickk622
Thu Oct 25, 2012 2:51 pm
Forum: PicoScope 6 for Windows
Topic: Duty Cycle
Replies: 3
Views: 4055

Re: Duty Cycle

Hi Martyn
Thank you for your reply I must apologise for not stating my question properly. I am trying to measure the duty cycle of a square wave with a high level of 4.06 volts and a low level of 1.89 volts and a cycle time of 330 micro seconds but picoscope struggles to give a measurement. :?
by nickk622
Thu Oct 25, 2012 1:13 pm
Forum: PicoScope 6 for Windows
Topic: Duty Cycle
Replies: 3
Views: 4055

Duty Cycle

How do you measure duty cycle on a signal that has an ofset. :?
by nickk622
Fri Sep 03, 2010 12:01 pm
Forum: USB PC Oscilloscopes
Topic: Up Grade
Replies: 1
Views: 4109

Up Grade

PicoScope 2203 Software 6.6.20.0 When the host PC software is upgraded does that upgrade the firmware in the PicoScope hardware. I am using the PicoScope to take measurments from electronic equipment being burst noise transient testing. The higher level of transient testing seems to cause malfunctio...
by nickk622
Fri Sep 03, 2010 10:42 am
Forum: PicoScope 6 for Windows
Topic: Refresh speed
Replies: 8
Views: 9628

Re: Refresh speed

Hi
Thanks for the imformation.
Regards
by nickk622
Thu Aug 26, 2010 9:46 am
Forum: PicoScope 6 for Windows
Topic: Refresh speed
Replies: 8
Views: 9628

Refresh speed

Hi
Does the refresh speed of the Pico Scope GUI total depend on the processing speed of the host PC.
Regards