1) There are three scopes on this particular PC, but there are many installations around the country just like it. 2) Trigger level/settings seem to be irrelevant. Even in the Picoscope 6 software, if I use a 4000 series scope (even with only one attached), and i set it to trigger based on ANY set o...

We have a problem with a monitoring application that leaves several Picoscope 4000s armed and waiting for triggers for 24/7/365. The PC CPU operates at 100% use with tremendous heat generation just so the driver can "wait" for the trigger. The setup (PC and scopes in an enclosed case) is on the outs...

I have had a similar problem with the PS4424 when trying to use Channel C to trigger the units. I am getting an Error code 34(Hex 22) when I try to set the trigger conditions with coupling on Channel C. It will work fine on Channel A. If I first try to set the trigger conditions on Channel C and get...

I am having problems with one application setting the correct trigger conditions. I can arm and trigger the scopes from Channel A with no problems. However, if I try to setup the structure to trigger from Channel C. It always give me the Error Code 22 - PICO_CONDITIONS - One or more of the condition...