Search found 202 matches

by NeilH
Mon Aug 10, 2020 8:36 am
Forum: Getting Started
Topic: 3404D AWG single shot
Replies: 1
Views: 35

Re: 3404D AWG single shot

Hi

If you set the Cycles Per Trigger setting in PicoScope 6 (or the shots variable if using the PicoSDK) to 1 then on a trigger the scope will output a single cycle of the signal then stop at each trigger.
by NeilH
Wed Aug 05, 2020 8:09 am
Forum: Introductions
Topic: Picoscope Channels and probes settings.
Replies: 4
Views: 1262

Re: Picoscope Channels and probes settings.

The probe scaling in PicoScope 6 are a post processing software feature which can be replicated in MATLAB by using the scaling factor of the probe and multiplying the measured voltage by that scaling to get what the probe sees. This is all done after the data is collected from the scope rather than ...
by NeilH
Tue Aug 04, 2020 3:34 pm
Forum: MATLAB
Topic: Problem calling 32-bit SDK from MATLAB R2014b
Replies: 3
Views: 1305

Re: Problem calling 32-bit SDK from MATLAB R2014b

Hi

Our MATLAB addons are only supported from 2015b so we cannot guarantee performance on earlier versions. For 32 bit system we do recommend using 2015b 32-bit.

Neil
by NeilH
Tue Aug 04, 2020 3:29 pm
Forum: Introductions
Topic: Picoscope Channels and probes settings.
Replies: 4
Views: 1262

Re: Picoscope Channels and probes settings.

Hi In PicoScope 6 you can set the probe scaling to translate the voltage values the scope measures into whatever the probe is measuring. This can be found in the channel menu by clicking on the channel then selecting the Probe you wish to scale either from the drop down menu or by pressing the three...
by NeilH
Wed Jul 22, 2020 11:03 am
Forum: USB PC Oscilloscopes
Topic: Solid Model for PicoScope 5K
Replies: 2
Views: 324

Re: Solid Model for PicoScope 5K

Hi

If you email into support@picotech.com with the scope model you need the 3D file for then we can see what we can do for you.

Neil
by NeilH
Tue Jul 21, 2020 10:00 am
Forum: Getting Started
Topic: 2206BMSO Matlab 2020a icdevice/connect fail
Replies: 4
Views: 652

Re: 2206BMSO Matlab 2020a icdevice/connect fail

Hi Stephen

I've just spotted that you're using the ps2000 examples, which will not work with your 2206B MSO.
Your scope needs the ps2000a instrument driver addon and examples to work in MATLAB.

Neil
by NeilH
Mon Jul 20, 2020 2:43 pm
Forum: Getting Started
Topic: Cannot run sample files from picosdk-python-wrappers repository
Replies: 1
Views: 409

Re: Cannot run sample files from picosdk-python-wrappers repository

Have you followed the setup steps in the README file?

Have you got the same bit version of the PicoSDK as your installed python?
by NeilH
Mon Jul 20, 2020 12:24 pm
Forum: Introductions
Topic: PicoScope AWG in matlab.
Replies: 6
Views: 892

Re: PicoScope AWG in matlab.

The PS5000aConfig script loads the ps5000aEnuminfo along with other required items into the main workspace
by NeilH
Mon Jul 20, 2020 9:28 am
Forum: Introductions
Topic: PicoScope AWG in matlab.
Replies: 6
Views: 892

Re: PicoScope AWG in matlab.

Can I check whether this error is occuring when running it in the main workspace or if it is in an app?
by NeilH
Tue Jul 14, 2020 1:06 pm
Forum: RF Products
Topic: SOLT-STD-M Calibration Data
Replies: 1
Views: 388

Re: SOLT-STD-M Calibration Data

Hi

The data should have been supplied on a USB stick with the calibration kit, if you don't have this email into support@picotech.com with the serial number from the side of the kit and we can get you a copy of the data.

Neil
by NeilH
Thu Jul 09, 2020 2:13 pm
Forum: PicoScope 6 for Windows
Topic: Picoscope in python3.7 and Pyqt
Replies: 1
Views: 693

Re: Picoscope in python3.7 and Pyqt

Hi

You can find out the device information such as model number and serial number in PicoScope 6 by going to Help->About.

Neil
by NeilH
Tue Jul 07, 2020 4:10 pm
Forum: USB PC Oscilloscopes
Topic: Registery data for long time
Replies: 1
Views: 466

Re: Registery data for long time

Hi

For this application I would suggest using the PicoLog 6 software rather than PicoScope 6 as it is designed for long term data logging with inbuilt alarm function.

Neil
by NeilH
Tue Jul 07, 2020 10:18 am
Forum: USB PC Oscilloscopes
Topic: 2000 series not compatible with pico 7 software?
Replies: 1
Views: 499

Re: 2000 series not compatible with pico 7 software?

Hi The current beta version of PicoScope 7 is the automotive version so only compatible with automotive scopes such as the 4X25A, 4X25, 4X23 which is the same as the automotive version of PicoScope 6. These automotive scopes are the only scopes suitable for use in automotive applications. The 2204A ...
by NeilH
Tue Jul 07, 2020 10:16 am
Forum: Getting Started
Topic: 2206BMSO Matlab 2020a icdevice/connect fail
Replies: 4
Views: 652

Re: 2206BMSO Matlab 2020a icdevice/connect fail

Hi Stephen

The scope can only be connected in a single instance so if you have PicoScope 6 connected to the scope, even if it isn't running currently, then MATLAB will be unable to find the device to use.

Neil
by NeilH
Tue Jul 07, 2020 10:14 am
Forum: PicoScope 6 for Windows
Topic: Picoscope in python3.7 and Pyqt
Replies: 1
Views: 693

Re: Picoscope in python3.7 and Pyqt

Hi

Can I check what device model you have?

Neil