Search found 4 matches

by MalcolmCaemmerer
Thu Jun 07, 2018 2:10 pm
Forum: PicoScope 5
Topic: Adding DC offset to Picoscope's SG
Replies: 4
Views: 18160

Re: Adding DC offset to Picoscope's SG

I've just set up a Diode Clamping circuit together with my PicoScope 3203 to generate a 0-3.6V pulse from the Signal Generator. The output was fairly low current but it was enough to drive a fiber optic transmitter for 188µs using a 900nF capacitor and a 10kOhm resistor. This was sufficient as I'm d...
by MalcolmCaemmerer
Fri May 05, 2017 11:25 am
Forum: PicoScope 6 for Windows
Topic: Waveform averaging - the PicoScope way
Replies: 29
Views: 78559

Re: Waveform averaging - the PicoScope way

Thanks for the update, Martyn
by MalcolmCaemmerer
Wed May 03, 2017 9:01 am
Forum: USB PC Oscilloscopes
Topic: Low output voltage AWG Picoscope 3203D
Replies: 0
Views: 5789

Low output voltage AWG Picoscope 3203D

Hi, I'm also showing a low voltage from the signal generator. The goal was to generate a 200µs pulse from 0V to 1V. I used an amplitude of 1V and offset of 1V but I'm only showing an output of about 200mV as shown. 200micropulse.pdf I've attached the pssettings file that I'm using with a 3203D. I al...
by MalcolmCaemmerer
Wed May 03, 2017 7:40 am
Forum: PicoScope 6 for Windows
Topic: Waveform averaging - the PicoScope way
Replies: 29
Views: 78559

Re: Waveform averaging - the PicoScope way

Hi Martyn,

Has this rolling average function been implemented yet?

Thanks, Malcolm