Search found 5 matches

by AngusX
Mon Dec 14, 2009 9:57 am
Forum: PicoScope 6 for Windows
Topic: Ist there a possibility for a acquisiton stop condition
Replies: 4
Views: 4858

Re: Ist there a possibility for a acquisiton stop condition

Hello, maybe i can make it more clearly with an example. Let's say i get a short request frame with a length of 5 ms. After the frame there is a 'gap' of 4 ms with no data. Then the answer will be send, a telegram of 80 ms. What i want is, that both frames will be captured in their own waveform buff...
by AngusX
Fri Dec 11, 2009 3:05 pm
Forum: PicoScope 6 for Windows
Topic: Ist there a possibility for a acquisiton stop condition
Replies: 4
Views: 4858

Re: Ist there a possibility for a acquisiton stop condition

Hello ziko, What is the data rate of the signal? Actually 38400 bps. How long is each event? That depends on the definition of an event. A bit has got the length of 25 ns, a byte has got 250 ns an a complete telegram varies between 2 and 200 ms. How many events do you want to capture? As much as pos...
by AngusX
Fri Dec 11, 2009 1:39 pm
Forum: PicoScope 6 for Windows
Topic: Ist there a possibility for a acquisiton stop condition
Replies: 4
Views: 4858

Ist there a possibility for a acquisiton stop condition

Hello, i want to get frames from a RS485 bus with a 5203. While trying, i thougt it was handy to use the waveform buffers for the single frames. I set up the trigger condition, so that it respond to the inter frame gap. Now i've got the beginning of the frame. The problem is, that the scope samples ...
by AngusX
Fri Dec 11, 2009 1:23 pm
Forum: Pre-Sales Advice
Topic: Limitations of PicoScope 6?
Replies: 2
Views: 5151

Re: Limitations of PicoScope 6?

Hello Erik,

thanks for your answer. Meanwhile we get a 5203 from our local dealer for testing and i can get much more points than in demo mode (demo mode is a little bit deceptive in regard of the capability of the scope :roll: ).

Regards, Andreas.
by AngusX
Wed Dec 09, 2009 10:24 am
Forum: Pre-Sales Advice
Topic: Limitations of PicoScope 6?
Replies: 2
Views: 5151

Limitations of PicoScope 6?

Hello, i tried your demo version of PicoScope 6. In this special case, i tried to acquire a signal (sine wave) with 5 ms/div. As oscilloscope i tried the 5203 and the 5204. I noticed that i was only able to get 781256 values in PicoScope with the 5203. With the 5204 i got 4 times more. OK, the 5204 ...