It's been more than a year, and today when I tried PicoScope-6.14.61, the bug that appeared during the demo has not been solved yet. I don't think it should be, if a new customer downloads the PicoScope software to try it out and finds out that it doesn't give the results he wants at all, he thinks ...

Hi, everyone! :D This is the case. When I used my 5440D MSO oscilloscope for testing, I found that the signal cannot be triggered with a trigger voltage of 0V in the ±100V range: ±100V range & 0V trigger voltage can't trigger normally.jpg But when I increase the trigger voltage a little, for exa...

Thank you Gerry, your reply is always so patient, professional and warm.
Thank you so much!
Bless you!

Hello everyone! When I used the 5244D MSO to test the G-pole waveform of the SMPS MOS-FET, I found that the square wave frequency with variable duty cycle displayed in the measurement toolbar is different from the result of the ruler test. Obviously, the value in the frequency measurement column is ...

Thank you Gerry!
Your detailed explanation has greatly benefited me!

It can work, but to get the frequency spectrum of 1~100Hz low frequency, the display is relatively slow, more than 2 minutes.
I am using the latest version of PicoScope 6.
Is this the result? Please the administrator to answer.
Thank you!

:D Yes, Martyn. It looks like this is a problem with PicoScope 6.14.23, I updated to Everything is normal after PicoScope 6.14.36! :shock: But I have another question. Why can't the persistence mode and spectrum mode customize the sampling rate? And I found that their sampling rate is very low, so t...

Hello Martyn! I set a 1KHZ square wave signal in my 5244D MSO, and then select the “Window Puls width” trigger of the oscilloscope, set the voltage range, and set the “time” to be greater than 8 nanoseconds, but it cannot trigger...... 1KHz square wave pulse width certainly larger than I set the tim...

Thank you Martyn!
My statement may not make you understand, what I mean is the following trigger mode, this trigger is based on the time between two voltage thresholds. It is not a simple edge trigger, I think.

I don’t see the slope trigger function in picoscope 6, but I want to know if it can be replaced by other trigger methods already available in picoscope 6?
Kindly ask for your reply, thanks!

Okay, Martyn, I get it. thank you for your reply.

Yes, I also think it is a problem with the DEMO mode.And I have seen the truth in the operation video you provided.

Thank you Martyn!

Hello, everyone! I found a problem when using the demo function of Picoscope 6. When I use "window trigger" a 1KHz 800mVpp signal, the waveform cannot be stabilized at a certain point. I mean, where is the trigger point for this kind of window? What is the scope of this so-called "window" on the tim...

Thank you Martyn!
I have read your reply.

Yes, Martyn. :D Thank you for your reply! I did see that in some forums, someone talked about this test issue. They said that as long as it is set to slope trigger, the ideal eye pattern can be obtained. But I did not see the slope trigger in PicoScope oscilloscope software. Can other trigger modes ...