Search found 6 matches

by Jaycen
Wed May 20, 2020 9:28 pm
Forum: PicoLog
Topic: Resolution and Image Blur
Replies: 1
Views: 3270

Re: Resolution and Image Blur

I figured out I was incorrectly calculating the pulses per second, so that solves the first issue.

The second was resolved when I moved the picolog file from the usb drive I'd opened it from and moved it to my hard drive.
by Jaycen
Wed May 20, 2020 1:51 pm
Forum: PicoLog
Topic: Resolution and Image Blur
Replies: 1
Views: 3270

Resolution and Image Blur

I've got a 2204A looking at an incremental encoder signal and a 24 VDC digital signal. The computer that runs our machine keeps shutting down with an error that indicates it "thinks" the material has suddenly stopped. It's possible this is a software bug from the manufacturer, but to confirm it's no...
by Jaycen
Tue May 19, 2020 1:03 pm
Forum: USB PC Oscilloscopes
Topic: PicoLog Setup
Replies: 1
Views: 1601

PicoLog Setup

Hi, I'm using PicoLog for the first time, and I cannot get the signal to look the way it does in the scope. I'm looking at an incremental encoder signal. On the PicoScope, the signal is a nice square wave, as I would expect. When I switch to PicoLog, it looks like noisy spikes. I can't figure out wh...
by Jaycen
Tue May 19, 2020 12:33 am
Forum: USB PC Oscilloscopes
Topic: Two Signals - Two Grounds
Replies: 2
Views: 1700

Two Signals - Two Grounds

I need to see the time relationship between two signals that are on different ground potentials. My understanding is that the 2204A does not have isolated grounds between the channels. I have a second 2204A that I could run through PicoLog. Would that give me the isolation I'm seeking, or would the ...
by Jaycen
Fri Nov 04, 2016 3:55 pm
Forum: Pre-Sales Advice
Topic: Help Choosing the Correct Scope
Replies: 2
Views: 3434

Re: Help Choosing the Correct Scope

Also, I see the scope is only rated to +/- 20 VDC.

Am I correct to assume that with a x10 probe, the scope can take +/- 200 VDC?
by Jaycen
Thu Nov 03, 2016 8:37 pm
Forum: Pre-Sales Advice
Topic: Help Choosing the Correct Scope
Replies: 2
Views: 3434

Help Choosing the Correct Scope

Hi! I'm a Manufacturing Engineer for a large company. Occasionally, I'll need to look for signal noise, but primarily I'll be using the scope to measure time by watching high-speed sensors turning on and off with respect to a "fire" signal from a solid-state output. For most applications, I don't th...