Search found 4 matches

by DavidH
Wed Oct 18, 2017 6:09 pm
Forum: USB PC Oscilloscopes
Topic: Device not recognized on PC boot
Replies: 4
Views: 2634

Re: Device not recognized on PC boot

Hi, Additional note. More specifically, here are the chipset, vendor and device IDs for the 3 machines with which I experienced the problem. PC1: Intel(R) USB 3.0 eXtensible Host Controller: VEN_8086 and DEV_A12F PC2: ASMedia XHCI: VEN_1B21 and DEV_1042 PC3: Intel 8 Series / C220 Series chipset: VEN...
by DavidH
Tue Oct 17, 2017 3:13 pm
Forum: USB PC Oscilloscopes
Topic: Device not recognized on PC boot
Replies: 4
Views: 2634

Re: Device not recognized on PC boot

Hello Hitesh, Thank you for your reply. I have an Intel(R) USB 3.0 eXtensible Host Controller, and it is up to date. Note, recently I found that disabling "Authorize the computer to shut down this device to save power" (approximative translation) in the driver's power management tab seems to help si...
by DavidH
Tue Oct 10, 2017 8:53 pm
Forum: USB PC Oscilloscopes
Topic: Device not recognized on PC boot
Replies: 4
Views: 2634

Device not recognized on PC boot

Greetings people, In my application, my PicoScope 6404C is permanently connected to my PC. If I connect the scope when the machine booted, it works fine, as confirmed by using PicoScope software. The device is listed under "Pico Technology Instruments" as "PicoScope 6000 Series PC Oscilloscope". But...
by DavidH
Thu Feb 18, 2016 3:12 pm
Forum: General Software Discussions
Topic: Relative time between triggers Rapid Block Mode
Replies: 20
Views: 16838

Re: Relative time between triggers Rapid Block Mode

Unfortunately, the ps6000 driver does not currently provide a trigger time stamping function in rapid block mode. I will make a request for this to our Development Team for consideration. I will also report the issue described regarding the Programmer's Guide. Regards, Greetings, We also bought a 6...