Good morning Ziko.

All fixed.

r5_21_5 would not let me modify the connected device so I followed our advice and completely reinstalled the program.

All up and running again, now with the software revision

Many thanks for your help.

Regards

Mitch

Hi there Ziko.

When I try installing r5_21_5 it never asks me what product to install, it simply does an update without asking me to do anything and takes about 20 seconds to do the update.

r5_21_3 asks me what device and takes around 2 minutes?

Any more ideas?

Cheers

Mitch

Hi all, Just a quick question. I just upgraded my Pico Logger Software from r5_20_3 to r5_21_3 then to r5_21_5 which seems to have worked fine, apart from one very small issue. When I go to 'Help' and 'About', the revision/version is no longer displayed? I show the revision/version with update r5_21...

Hi there Ziko Sorry my reply is so late, ive been on paternity leave Had the problem on just PicoPlayer loading up when Recorder is shut down and there is no icon in the task bar and its not been hidden? Ive attached a copy of the setting file for you to have a look at regarding the value flicker We...

Right, got my head around a few things so thought id update my situation Ive updated from PicoLog V5.20.1 to 5.20.3 which seems to have helped not only the freezing problems but the loading of PicoRecorder I also installed more PC memory which seems to have helped, may be coincidence as I did it whe...

Evening all Got a few questions/problems regarding my Pico software 1) why does PicoRecord load ok from a cold PC start but if I run PicoRecord, close it down then try and open it again, all that loads up is PicoPlayer and nothing I do seems to load PicoRecord, even if I do it from Start-Programmes-...

Excellent news, cheers Peter

Just another quick question The max input voltage is +2.5V DC but does this mean 2.5V is the maximum range limit or the maximum safe working limit? Basically I have a signal conditioner that kicks out 0-5V so if the ADC-11 saw 5V on ther input terminals, would it destroy the unit or just saturate th...

Think I will buy a TC-08 : )

Cheers Peter

Mitch

You are a start PeterF, exactly what I needed to know

It will be easier and less time consuming for me to buy the ADC-11 and the TC-08, unless the CJC circuit is just a couple of components?

Pico do not produce a CJC input extension board then I take it?

Thanks again for the help

Mitch

Hi all, new to the site so forgive me for any questions that is child's play My first question is I want to know exactly what input types can be used and is it only voltages that are allowed? Secondly, will the ADC-11/12 allow K type thermocouples to be connected directly to it or will I need a TC-0...