Hi Hitesh,

but this is not working if you open a second window with
a spectrum view.

Jürgen

Hello ! I openend the demo (scope view) and added a spectrum view. Unfortunateley I don't see anything of the spectrum (1 kHz) because the x-axis is scaled from 0 to 10 MHz and the signal disappears at the left border. I didn't find a possibility to scale the x-axis of the scope view separately. How...

Hello Bilal,

I think you should make the software more comfortabel.

Perhaps you can add an auto-adjust function for serial decoding
which is enabled by default and can be disabled.

Jürgen

Problem solved: The real baudrate of the Arduino is 58.824, 2,1% higher than 57.600. This is within the specifications. And the PicoScope Software ist not very fault-tolerant. In cases like this it would be a solution to increase the fault tolerance or to open a dialog with the question: "Real baudr...

It seems to be a software problem. The signal of the second character "e"
is ok. The gap beetween the two characters seems to be faulty.

And here are two characters. The first "H" is correct.

Attached please find two screenshots.

If you need more informations please tell me.

Jürgen

I tried the same with a 7 € chinese logic analyzer and everything works
with 115200 baud. No problems ! The LA decodes "hello world!".

Is there anyone of the support team who can help me?
Otherwise I have to bring the PicoScope back to the dealer.

Thanks ! Jürgen

Hello ! I got my 2206A just today and connected it to an Arduino. I sent "Hello world!" to the console at different baud rates and monitored the TX pin of the Arduino with the PicoScope. Everthing was fine from 9600 to 38400 baud. With higher baud rates it doesn't work. Does anyone have an idea what...