Yep, they are identical. Must be worn from overuse... Thanks, Martyn!

Hello Pico Tech! Our team has been using two of your 2203 scopes to capture data. We recently borrowed a 4423 in order to experiment using a 4-channel scope. What we found was quite puzzling, and was wondering if there was any logical explanation... The cable from the 2203 (blue, same label and mark...

Thanks Robin! I have never noticed the properties tab before! The channel options buttons, however, are grayed out and unable to be clicked.

Thanks again!

Thanks for the quick reply, Robin. Can I restate the question? I have both PicoScope v5 and v6 installed on my laptop for field use. I need to run the ADC-11 at the same time as the ADC-2203. Can the software (and pc) handle both applications triggering and capturing data at the same time? Thanks in...

Thank you for the quick response, Robin. Let me clarify a little further. I can see/interpret the following when opening a psdata file: trigger channel, threshold, pre-trigger, and rising/falling edge. Is there anyway to determine the number of samples, resolution enhancement used for each channel, ...

Hello,

Is it possible to pull the trigger settings and other information from a psdata file? If so, how do I do it?

Thanks!

Can you run multiple versions of PicoScope on one PC? We have an older ADC-11 (that needs PicoScope 5) and a 2203 that runs on 6. Can we have both running and capturing at the same time?

If we purchase the parallel to USB adapter, can we use v6 for the ADC11 or are we still limited to v5?

Thanks!

picojohn, sorry for the confusion. hillp is part of my team (and frankly, more familiar with our setup than I am)...

Thank you for the response, John. Any explanation as to why the waveform never pass through the trigger diamond? I will e-mail a couple other psdata files to you of other "good" traces from when we were figuring out the best trigger settings. I use the word "good" loosely as we had good numbers but ...

You've got mail...

Printed the graphs to PDF files...

Hello, We are using the 2203 with 6.0.15.2 to capture a range of PSI that is reported back to the scope in a range of 0.25V to 4.25V. Our software specs are set as follows: -Collection time: 20 ms -Number of samples: 200 kS -Trigger: Probe B, rising edge, threshold = 1V, pre-trigger = 70% Out of rou...